This is a restricted part primarily used for drone manufacturing and repair. We require
proper end use documentation, identity proof of company/individual as well as license to manufacture/operate drones or an indemnity bond for the same. Without this documentation we can not service any order which includes this item.
You can download the format for documents here.
We will share this information to any government agency if and when required.
Extremely Powerful RC Brushless motor in small size. Specialized for multi-rotors. Includes prop adaptor to suite variety of props, supports pusher or puller props(Counter rotating props) . To be used directly with propellers. Comes with motor mount and Bullet male connectors.
Good quality robust speed controllers, they will work straight out of the box for model aircraft. Silicon leads and standard Futaba / JR plug connectors.
Counter Rotating Propeller 1045/1045R (CW + CCW) for Multirotors. Compatible with quadcopter, hexacopter and octocopter in various combinations of pusher and puller propeller. Compatible with our 2212 brushless motors with prop adapters. It comes with multiple diameter fixture rings so it can fit most of motors with various prop adapters and shaft diameters. Sold in pair only.
- Weight 52 gm
- Runs on 2-3 Cell Li-Po battery
- ESC Requirement minimum 25A
- Length 43.5mm with shaft
- Diameter 28.5mm
- Shaft Diameter 3.17mm
- 980 RPM/V no load speed
- Free Load Current 2.5A
- Maximum Efficiency : 86%
- Thrust with 1047 Prop at 12V: 880gm
- Included : Propeller Adaptor, Motor Mount, Mounting Screws
- High rate PWM
- Low resistance
- Sixteen cells Max (with BEC disabled)
- User programmable brake
- Low voltage auto setting based on battery
- Throttle range self-adjusting
- Soft start ramp up
- Auto motor cutoff with reset
- Runs motor in forward or reverse
- Safe power arming program ensures motor will not run accidentally after turn on
- Low torque start
- Auto shut down when signal is lost
- Constant Current: 30A
- BEC 3A
- Input Volt: 6V - 12V
- Max Current: 40A
- Low-Voltage Cutoff: Auto detect and set
- Size: 56mm x 24mm x 8.5mm
- Weight: 26g
Product Include :
RC Brushless Motor 2212 1000KV with Propeller Adaptor [RKI-1242]
Brushless ESC 30A with SimonK firmmware for Multirotors[RKI-1941]
Counter Rotating Propeller 1045/1045R for Quadrotor-Multirotor [RKI-1480]