1. Home
  2. Solar Panel Cleaning Robot Parts
  3. Motor and Driver Combo
  4. E-BIKE DC MOTOR MY1016Z2 24V 300RPM 250W with Cytron MD20A Driver (Original)

E-BIKE DC MOTOR MY1016Z2 24V 300RPM 250W with Cytron MD20A Driver (Original)

Model: RMCS-7065
Availability : In Stock
₹3,598.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹647.64 available. (Know More)
Warranty : None
Free Economy Shipping option available
QTY :

This popular reduction dc motor is simply the most commonly used motor for Scooters, Bikes and quad’s available in the market. Also due to its robustness it is also used in many DIY projects making segway, e-cars and in many robotics like ATV robots and combat robots.
 
The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink. The onboard test buttons and motor output LEDs allow the functional test of the motor driver in a quick and convenient way without hooking up the host controller.This motor driver can be controlled with PWM and DIR inputs. With input logic voltage range from 1.8V to 12V, it’s compatible with a wide variety of host controllers (e.g. Arduino, Raspberry Pi, PLC).
 
Various protection features are also incorporated in the MD20A. Overcurrent protection prevents the motor driver from damage when the motor stalls or an oversized motor is hooked up. When the motor is trying to draw current more than what the motor driver can support, the motor current will be limited at the maximum threshold.
 
Assisted by temperature protection, the maximum current limiting threshold is determined by the board temperature. The higher the board temperature, the lower the current limiting threshold. This way, MD20A able to deliver its full potential depending on the actual condition without damaging the MOSFETs.
 
Note: Power input does not have reverse-voltage protection. Connecting the battery in reverse polarity will damage the motor driver instantaneously.
Motor Specifications
  • Voltage: 24 Volt DC.
  • Output: 250 Watt.
  • RPM (after Reduction) – 300.
  • Full load current – 13.4A.
  • No load Current – 2.2A.
  • Torque Constant – 8 N.m (80 kg-cm).
  • Torque stall – 40 N.m (400 kg-cm).
  • Sprocket: 9Tooth only fits #410 bicycle chains.
  • For Chain Size: Pitch 0.5 inch.
  • Roller Diameter 0.3 inch.
  • Roller Width 0.16 inch.
Drive Overview
  • Motor Channel: 1
  • Operating Voltage (VDC): 6 to 30 VDC
  • Peak Current (A): 60 (10 seconds)
  • Continuous Current (A): 20
  • Motor Output PWM Frequency : 20 kHz
Drive Features
Example Application: Automated Guided Vehicle (AGV), Solar Tracker, Game Simulator, Mobile Robot, Automation Machine.
  • Bidirectional control for one brushed DC motor.
  • Buttons for quick testing.
  • Inputs compatible with 1.8V, 3.3V, 5V and 12V logic (Arduino, Raspberry Pi, PLC, etc).
  • PWM and DIR inputs.
  • LEDs for motor output state.
  • PWM frequency up to 20kHz (Output frequency is the same as input frequency).
  • Compatible with sign-magnitude and locked-antiphase PWM operation.
  • Overcurrent protection with active current limiting.
  • Temperature protection.
  • Undervoltage shutdown.
  • Dimension: 86mm x 52mm.
Package Includes:
  • 1 x E-BIKE DC GEARED MOTOR MY1016Z2  24V 300RPM 250W
  • 1 x CYTRON 20AMP 6V-30V DC MOTOR DRIVER MD20A (ORIGINAL)
 
Downloads
 

Drive Datasheet

Datasheet


Downloads
 

Drive Datasheet

Datasheet