Name: E-BIKE DC MOTOR MY1016Z2 24V 300RPM 250W with Cytron MDD20A Driver (2 Channels) (Original)
Brand: Robokits India
SKU: RMCS-7066
Price: 7852.9 INR
Availability: InStock

prev next

Model: RMCS-7066

Availability : In Stock

E-BIKE DC MOTOR MY1016Z2 24V 300RPM 250W with Cytron MDD20A Driver (2 Channels) (Original)

Model: RMCS-7066

Availability : In Stock

₹6,655.00

Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹1197.9 available. (Know More)
Warranty : None
Free Economy Shipping option available

QTY :

This popular reduction dc motor is simply the most commonly used motor for Scooters, Bikes and quad’s available in the market. Also due to its robustness it is also used in many DIY projects making segway, e-cars and in many robotics like ATV robots and combat robots.

The MDD20A enables bidirectional control of two high-power brushed DC motors from 6V to 30V. With full discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously for each motor without any heatsink.

A lot of motor drivers in the market specify their current ratings according to the MOSFET specifications. This is highly inaccurate and overrated because the actual current capability is dependent on many other factors such as switching frequency, heatsink efficiency, PCB size, copper thickness and etc. At Cytron, we test all our motor drivers by running the motor at full load in our lab and monitor its temperature with thermal camera. This test is carried out until the temperature stops increasing and reaches a stable point (usually achieve in 15 minutes). This way, we can get the true current ratings for all our motor drivers.

The onboard test buttons and motors output LEDs allow functional test of the motor driver in a quick and convenient way without hooking up the host controller.This motor driver can be controlled with PWM and DIR inputs. With input logic voltage range from 1.8V to 12V, it’s compatible with wide variety of host controller (e.g. Arduino, Raspberry Pi, PLC).

Various protection features are also incorporated in each channel of the MDD20A. Overcurrent protection prevents the motor driver from damage when the motor stalls or an oversized motor is hooked up. When the motor is trying to draw current more than what the motor driver can support, the motor current will be limited at the maximum threshold.

Assisted by temperature protection, the maximum current limiting threshold is determined by the board temperature. The higher the board temperature, the lower the current limiting threshold. This way, MDD20A able to deliver its full potential depending on the actual condition without damaging the MOSFETs.

Note: Power input does not have reverse-voltage protection. Connecting the battery in reverse polarity will damage the motor driver instantaneously.

Motor Specifications

Voltage: 24 Volt DC.
Output: 250 Watt.
RPM (after Reduction) – 300.
Full load current – 13.4A.
No load Current – 2.2A.
Torque Constant – 8 N.m (80 kg-cm).
Torque stall – 40 N.m (400 kg-cm).
Sprocket: 9Tooth only fits #410 bicycle chains.
For Chain Size: Pitch 0.5 inch.
Roller Diameter 0.3 inch.
Roller Width 0.16 inch.

Drive Overview

Motor Channel: 2
Operating Voltage (VDC): 6 to 30 VDC
Peak Current (A): 60 (10 seconds)
Continuous Current (A): 20
Motor Output PWM Frequency : 20 kHz

Drive Features

Example Application: Automated Guided Vehicle (AGV), Solar Tracker, Game Simulator, Mobile Robot, Automation Machine.

Bidirectional control for one brushed DC motor.
Buttons for quick testing.
Inputs compatible with 1.8V, 3.3V, 5V and 12V logic (Arduino, Raspberry Pi, PLC, etc).
PWM and DIR inputs.
LEDs for motor output state.
PWM frequency up to 20kHz (Output frequency is the same as input frequency).
Compatible with sign-magnitude and locked-antiphase PWM operation.
Overcurrent protection with active current limiting.
Temperature protection.
Undervoltage shutdown.
Dimension: 89mm x 79mm