1. Home
  2. Solar Panel Cleaning Robot Parts
  3. Motor and Driver Combo
  4. Rhino 24V 25RPM 100W IG52 DC motor with Rhino MD20Amp Driver (1 Channels)

Rhino 24V 25RPM 100W IG52 DC motor with Rhino MD20Amp Driver (1 Channels)

Model: RMCS-7059
Availability : In Stock
₹6,600.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹1188 available. (Know More)
Warranty : 3 months against manufacturing defect
Free Economy Shipping option available
QTY :

The Rhino 25 rpm IG52 motor has a rated torque of 280kgcm and a stall torque of 590kgcm. So the motor can be used uptill 590kgcm, however the motor should not heat up beyond 45 to 50 degree centigrade. The base motor of the Rhino IG52 motor is high quality industrial grade 100W 2810 rpm motor which alongwith the sturdy all metal planetary gear box provides the 35 rpm at the output shaft.
 
The Rhino MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink. The onboard test buttons and motor output LEDs allow the functional test of the motor driver in a quick and convenient way without hooking up the host controller.This motor driver can be controlled with PWM and DIR inputs. With input logic voltage range from 1.8V to 12V, it’s compatible with a wide variety of host controllers (e.g. Arduino, Raspberry Pi, PLC).
 
Various protection features are also incorporated in the Rhino MD20A. Overcurrent protection prevents the motor driver from damage when the motor stalls or an oversized motor is hooked up. When the motor is trying to draw current more than what the motor driver can support, the motor current will be limited at the maximum threshold.
 
Assisted by temperature protection, the maximum current limiting threshold is determined by the board temperature. The higher the board temperature, the lower the current limiting threshold. This way, Rhino MD20A able to deliver its full potential depending on the actual condition without damaging the MOSFETS.
 
All inputs of the Rhino DC Driver are electrical and opto-isolator.
Note: This is Rhino's equivalent of Cytron's MD20A driver.
Features
  • Higher Torque to Volume ratio than any comparative motor in the category.
  • Silent Operation when compared to other make gear box motor.
  • Very low no load current due to high precision gear box.
  • High safety margin of at least 1.5 times the peak wattage rating.
  • Continuous use in industrial applications
  • Shaft provided with keyway slot and key for positive coupling applications.
  • Alloy steel Shaft of 12mm provides a sturdy and durable output.
 
Specifications
  • Hardened shaft diameter: 12mm.
  • Shaft Length: 28mm.
  • Mounting PCD of 42mm x 4nos -M5 tapped.
  • Base Motor Diameter: 54mm.
  • Gear Box Diameter: 52mm.
  • Motor Length without Shaft: 203mm.
  • Motor Weight: 2050 grams
  • Gear Ratio : 1:102.
  • Rated Torque: 280kgcm.
  • Stall Torque: 590kgcm.
  • Gearbox Breaking Torque: 200kgcm
  • Rated speed: 25RPM.
  • Base Motor speed: 2800RPM.
  • Replaceable Carbon Brushes.
  • No-load current = 1.12A.
  • Stall current = upto 30A(Max).
Drive Overview
  • Motor Channel: 1
  • Operating Voltage (VDC): 6 to 30 VDC
  • Peak Current (A): 60 (10 seconds)
  • Continuous Current (A): 20
  • Motor Output PWM Frequency : 20 kHz
Drive Features
Example Application: Automated Guided Vehicle (AGV), Solar Tracker, Game Simulator, Mobile Robot, Automation Machine.
  • Bidirectional control for one brushed DC motor.
  • Buttons for quick testing.
  • Inputs compatible with 1.8V, 3.3V, 5V and 12V logic (Arduino, Raspberry Pi, PLC, etc).
  • PWM and DIR inputs.
  • LEDs for motor output state.
  • PWM frequency up to 20kHz (Output frequency is the same as input frequency).
  • Compatible with sign-magnitude and locked-antiphase PWM operation.
  • Overcurrent protection with active current limiting.
  • Temperature protection.
  • Undervoltage shutdown.
  • Dimension: 86mm x 52mm.
Package Includes:
  • 1 x RHINO 24V 25RPM 100W IG52 EXTRA HEAVY DUTY PLANETARY GEARED DC MOTOR 280KGCM
  • 1 x Rhino MD20Amp 6V-30V DC Motor Driver (1 Channels)
Dimensions
Below is a video demonstarting the application of IG52 motors
Downloads
 

Motor Datasheet

Datasheet

Drive Datashhet

Datasheet


Downloads
 

Motor Datasheet

Datasheet

Drive Datashhet

Datasheet