This robot is a professional small humanoid robot which is an excellent first step for initiation into the field of Humanoid Walking Robots

The High Torque Standard Servo Motor included with the kit are with Dual Ball Bearing and Metal Gears. It provides 14kg/cm at 4.8V and 16kg/cm at 6V.

The servo controller is Uno R3 based USB 18 Servo Controller compatible with Arduino alongwith graphical user interface and programming code conversion facility for Arduino code. The software helps to develop the complex sequences in real time on the robot kit and then it also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous.

 

For More Available Humanoid and Biped Robot Kit Click Here.

 

Product Features

• Walking, Dancing, Punching and various moves can be programmed easily
• Cost-effective and easy-to-use
• For hobbyists, robot competition, kids
• Humanoid robot
• Colour: Black
• Size:25.5cm(H)*22.5cm(W)

 

Servo Motor Specifications

• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -10 to +60 Degree C
• Operating Speed (4.8V): 0.18sec/60 degrees at no load
• Operating Speed (6.0V): 0.14sec/60 degrees at no load
• Stall Torque (4.8V): 14kg/cm
• Stall Torque (6.0V): 16kg/cm
• 360 Modifiable: Yes
• Potentiometer Drive: Indirect Drive
• Bearing Type: Double Ball Bearing
• Gear Type: All Metal Gears
• Connector Wire Length: 12"
• Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
• Weight: 48gm

*We recommend upgrading to RKI-1203 servo motor for continuous use

 

18 Servo Controller Features:

• Bluetooth interface for wireless controll of robots
• Controls 18 hobby servos from PC and Microcontroller
• USB interface
• Comes Pre-loaded Arduino Uno bootloader
• Software exports servo sequences to Arduino Uno for running servo sequences
• Independent range setting for each servo
• Independent offset, Maximum, Minimum and Direction setting for each servo
• 0.5-microsecond resolution
• 50 Hz update rate
• Small size of 80 X 47 mm
• Plug and Play, Auto detection of hardware
• Easy to use software
• Servo sequencer with speed, delay, goto and many other features
• Home and neutral position setting
• Easy to install USB driver and Application software

 

This Package Includes

• 1 X Uno R3 based Bluetooth + USB 18 Servo Controller Compatible with Arduino
• 1 X Lithium Ion Rechargeable Battery 7.4V 2200mAH
• 9 X High Torque Metal Gear Standard Digital Servo
• 8 x Multipurpose Aluminum Standard Servo Bracket
• 1 x Short U Shape Aluminum Servo Bracket
• 2 x Long U Aluminum Servo Bracket
• 2 x Oblique U Shape Aluminum Servo Bracket
• 4 x Interconnect Aluminum Servo Bracket
• 4 x L Shaped Interconnect Servo Bracket
• 1 x Large U Beam Aluminum Servo Bracket
• 2 x Robot feet Aluminum Servo Bracket
• 9 x Metal Horn for Servo 25T
• 4 x Miniature Ball Radial Bearing
• 1 x Screw and screw cap set
• 1 X Li-Ion / Li-Po Intelligent Balance Charger for 2-3 Cell Battery 
• 1 X SMPS Supply 12V 1A