This robot is a professional small humanoid robot consist of full aluminum parts, smooth surface with smooth edges not hurting hands, the metal is unbleached, beautiful and durable.

 

The High Torque Standard Servo Motor with Dual Ball Bearing and Metal Gears. Provides 14kg/cm at 4.8V and 16kg/cm at 6V. Replacement for HS-645MG.

 

Arduino Uno R3 based USB 18 Servo Controller is ideal for making Autonomous and PC based systems which run over Hobby Servo motors. The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system. It also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous.

 

If you select the RKI-1204 (servo Motor) so not included with metal horn. because metal horn is not compatible with RKI-1204 motor.

 

 

Product Features

• Arches punching, corner cutting
• Cost-effective and easy-to-use
• For hobbyists, robot competition, kids
• Humanoid robot
• Colour: Black
• Size:40cm(H)*23cm(W)

Servo Motor Specifications

• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -10 to +60 Degree C
• Operating Speed (4.8V): 0.18sec/60 degrees at no load
• Operating Speed (6.0V): 0.14sec/60 degrees at no load
• Stall Torque (4.8V): 14kg/cm
• Stall Torque (6.0V): 16kg/cm
• 360 Modifiable: Yes
• Potentiometer Drive: Indirect Drive
• Bearing Type: Double Ball Bearing
• Gear Type: All Metal Gears
• Connector Wire Length: 12"
• Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
• Weight: 48gm

 

18 Servo Controller Features:

• Bluetooth interface for wireless controll of robots
• Controls 18 hobby servos from PC and Microcontroller
• USB interface
• Comes Pre-loaded Arduino Uno bootloader
• Software exports servo sequences to Arduino Uno for running servo sequences
• Independent range setting for each servo
• Independent offset, Maximum, Minimum and Direction setting for each servo
• 0.5-microsecond resolution
• 50 Hz update rate
• Small size of 80 X 47 mm
• Plug and Play, Auto detection of hardware
• Easy to use software
• Servo sequencer with speed, delay, goto and many other features
• Home and neutral position setting
• Easy to install USB driver and Application software

Downloads