Four of the most popular online APPs are compatible (Android, Apple, PC all-pass kill) compatible simultaneously with the four main discharge modes (constant current, constant power, constant resistance, and constant voltage full coverage) simultaneous wireless Bluetooth and wired connection compatibility Numerous large-scale instrumentation circuit concepts and evolutionary extractions are condensed into a single test using a high-power and large-discharge tube. On a single screen, you may access all the key benefits. A number of parameters are shown on the discharge ageing screen. The test is quick, easy, and effective. diversifying the playtests With an externally wired NTC temperature probe, internal and exterior dual temperature measurement may be achieved, making it appropriate for more situations. Real-time monitoring of the discharge tube's condition, three sophisticated safety safeguards, and secure and trustworthy built-in intelligent fan switch with temperature control

Specification:

• Power Supply: 12V DC
• Test voltage: 2~200V
• Working current: 0.2~20A
• Condition of fan rotation: when the temperature is greater than 10W or the temperature is higher than 45°
• DL24P  Discharge power: voltage * current < 180 W
• (The actual running current is limited by the maximum power, please adjust the current according to the law of energy conservation)
• The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then discharge, you can first slowly and smoothly  adjust the preset value in the start and discharge, in order to adjust up to the maximum power for  dischargin

Working Procedure :

• Check whether the hole is lowered into place, insert the accessory, and tighten the screw to the right.
• Supply power to the equipment system, long press the setting, select the "Working mode CC, CR, CV, CP","Timedischarge","Cutoff voltage". Click "START" to complete the setup
• Insert the power supply, battery, etc. You need to be tested/loaded from the left, and press "-" to reduce the value to the minimum value.
• Click "START" select the position where the value needs to be increased according to the setting. Press "+" to increase the value. The device starts to work. When the temperature is greater than 40℃ or the power is greater than 10W, the fan start to work.
• Increase the current according to the maximum output current of tested power supply/battery. The test is the power adapter with a maximum current of 3A. During operation, try not to exceed the maximum allowable current of the adpater to avoid accidents.
• After the test being completed, long press to "START" to enter the device background, clear the corresponding data so that the next text can be used for data statistics