The MLX90614ESF-BCC non-contact infrared thermometer for use with Arduino, or any microcontroller that can communicate with it through I2C interface.

 

The MLX90614 object temperature range of -40  to125 º C ambient temperature and -70  to 382.2 º C factory calibration.Chip calculated temperature is the average temperature of all objects in the sensor perspective within the MLX90614 room temperature within the standard accuracy ± 0.5 º C.

 

Built-in Niefei Er lens, daylight immune-free calibration, the BCC series FOV 35 degrees, 3V power supply, with a gradient of temperature compensation for short-distance measurement.

Features:

• Chip: MLX90614ESF-BCC
• Power supply power supply: 3-5v (internal low dropout voltage regulator)
• Communication mode: Standard IIC communication protocol
• Mounted on a breakout board with two types of pins
• 10k Pull up resistors for the I2C interface with optional solder jumpers
• Factory calibrated in wide temperature range:-40 to+125°C for sensor temperature and-70 to +380°C for object temperature.
• High accuracy of 0.5°C over wide temperature range (0...+50°C for both Ta and To) High (medical) accuracy calibration
• Measurement resolution of 0.02°C
• SMBus compatible digital interface
• Customizable PWM output for continuous reading
• Simple adaptation for 8 to16V applications
• Sleep mode for reduced power consumption