1. Home
  2. IOT - Wireless Solutions
  3. Audio and Video
  4. MH-Z19C Infrared Carbon Dioxide (CO2) Sensor with UART/Analog/PWM output PCB Mount

MH-Z19C Infrared Carbon Dioxide (CO2) Sensor with UART/Analog/PWM output PCB Mount

Model: RKI-4600
Availability : In Stock
₹2,211.00  ₹2,010.00
Sale 
-9%
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹361.8 available. (Know More)
Warranty : None
Free Economy Shipping option available
QTY :

The MH-Z19C carbon dioxide gas sensor (hereinafter referred to as the sensor) is a general-purpose intelligent small sensor that uses the principle of non-dispersive infrared (NDIR) to detect the presence of C02 in the air. And other features; built-in temperature compensation: simultaneously has serial output, PWM output, easy to use. The sensor is a high-performance sensor made by closely combining mature infrared absorption gas detection technology with sophisticated optical circuit design and sophisticated circuit design.
Features:
  • Detection gas: carbon dioxide
  • Power supply voltage: DC (5.0 ± 0.1) V
  • Average current: <40mA (@5V power supply)
  • Peak current: 125 to (@5V power supply)
  • Interface level: 3. 3v (compatible with 5v)
  • Measuring range: 400-5000PPM optional
  • Output signal: serial UART (TL level 3.3V)
  • Warm-up time: 1min
  • Response time: T90< 120s
  • Working temperature: -10-50degree
  • Working humidity: 0~95%RH (no condensation)
Pin Description:
  • Vin: Power +(in)
  • GND: power supply-(GND)
  • PWM: PWM
  • Hd: HD (zero calibration, low level is effective for more than 7 seconds)
  • Rx: UART (RXD) TTL level data input
  • Tx: UART (TXD) TTL level data output
PWM Output:
  • Output signal: serial UART (TL level 3.3V)
  • Warm-up time: 1min
  • Response time: T90< 120s
  • Working temperature: -10-50degree
  • Working humidity: 0~95%RH (no condensation)
  • Calculation formula for obtaining current CO2 concentration value by PWM: Cppm=2000X (TH-2ms)/(TH+TL-4ms)
  • Cppm: CO2 concentration value calculated by the unit of ppm
  • TH: the time when the output is high level in one output cycle
  • TL: the time when the output is low in one output cycle
 
 
Serial output (UART) :
  • Hardware connection, connect the sensor's Vin-GND-RXD-TXD to the user's 5V-GND-TXD-RXD. (User terminal must use TTL level
 
 
Precautions:
  • In the process of welding, installation and use of the sensor, the gold-plated plastic cavity should be prevented from withstanding pressure in any direction.
  • If the sensor needs to be placed in a small space, this space should be well ventilated, especially the two diffusion windows should be in a well ventilated position.
  • . The sensor should be far away from the heat source, and avoid direct sunlight or other heat radiation.
  • The sensor should be calibrated regularly, and the calibration period is recommended to be no more than 6 months.
  • Do not use the sensor for a long time in the environment with high dust density.
  • In order to ensure that the sensor can work normally, the power supply voltage must be maintained at (5.0 ± 0.1) VDC. The power supply current must not be less than 150mA
  • If it is not within this range, the sensor may be faulty, the output concentration of the sensor is low or the sensor cannot work normally.
  • When manually calibrating the zero point or sending the command to calibrate the main points, it must be stable
  • Work continuously for more than 20 minutes in a gas environment (400ppm).
  • The sensor is prohibited to use wave peak depth.
  • When welding with iron, set the temperature to (350±5) degree, early
  • The pick-up time must be less than 35.
  • When using the sensor, it is recommended that the customer use the method of inserting the solder bump to directly insert and remove the sensor for toilet maintenance.
Package Includes:
  • 1 x MH-Z19C INFRARED CARBON DIOXIDE (CO2) SENSOR WITH UART/ANALOG/PWM OUTPUT PCB MOUNT

Customers also purchased