TrackBot is a simple remote controlled robot. Its made using Normal 100 RPM DC motors, Advance Robot Chassis, 2cm width Pulleys, Track Belts 2 cm width and a 11.1V 1500 mAh battery. It is controlled through IR Transmitter and receiver with motor driver circuit.
TrackBot IR Remote Controlled Kit
This kit contains everything you will need to make a working robot except hardware tools like screwdrivers, pliers, spanner etc and 2 X AA size cells
This kit uses 2 dummy motors as it is a belt driven system, there are only 2 driving motors of 100 RPM. All parts used in this robot except some screws and studs are available on our website. You can build your own configuration after buying different parts separately if you want your customization and optimization.
The advantage of using track belt is Compared to wheel which provides only one point contact to ground belt provides a large contact area to ground. This provides high traction and also helps going over the obstacles. As this is a track belt driven robot it works on skid steer mechanism. On pressing forward button on remote both left and right motor moves forward so robot goes forward, for backward both motors move backward, for left turn left motor goes backwards and right goes forward and for right turn right motor moves backwards and left motor moves forward.
TrackBot IR Remote Controlled Kit includes..
- 1 X Advanced Robot Chassis
- 2 X 100 RPM DC Motors
- 4 X 2 Cm width Pulleys wheel
- 2 X Track belts 2 Cm width, cut and joined to proper length
- 1 X 11.1V 2200mAh battery
- 1 x Charger
- 1 X IR RC5 Remote
- 1 X IR Receiver and Motor Controller Circuit for 2 DC motors
- All required screws, studs, cable ties and connectors
TrackBot IR Wireless Robot Assembly Guide and Manual