1. Home
  2. IOT - Wireless Solutions
  3. IOT - Internet of Things
  4. GenX RTK F9P Tough Ground (Tough + Survey Antenna) RTK GPS Quad-Constellation GNSS module for RTK Base USB interface

GenX RTK F9P Tough Ground (Tough + Survey Antenna) RTK GPS Quad-Constellation GNSS module for RTK Base USB interface

Model: RKI-3025
Availability : In Stock
₹35,386.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹6369.48 available. (Know More)
Warranty : None
Free Economy Shipping option available
QTY :

GenX RTK F9P Tough is RTK GNSS module with U-blox ZED-F9P, IST8310 Compass. It can be used as RTK Rover or Base with external antenna. Whole package is housed in tough Aluminum casing and has USB and 2 Serial port interfaces.
GenX RTK F9P Tough combined with Survey antenna can be used to setup RTK Base which can be used for sending corrections to RTK rovers in drones.
The GenX RTK F9P Tough can receive and track multiple GNSS systems. With state of the art multi-band RF front-end architecture, all four major GNSS constellations (GPS, GLONASS, Galileo, and BDS) can be acquired simultaneously. All satellites in view can be processed to provide an RTK navigation solution when used with correction data from RTK base. The module communicates on multiple protocols like UBX, NMEA and RTCM and can be easily integrated with any modern flight controller.
It can be configured for concurrent GPS, GLONASS, Galileo, BDS, QZSS, and SBAS reception to provide a high-performance position reporting and navigation solution. It provides exceptional sensitivity and acquisition times, and interference suppression measures enable reliable positioning even in difficult signal conditions.
Specifications

GNSS module

U-blox ZED-F9P

Compass

IST8310

Weight

20g – Only module

24g (with 15cm MMCX Male to SMA Female Connector)

Application

Rover (Aircraft) or Base

Receiver type

■ GPS L1C/A L2C ■Galileo E1 E5b

■ GLONASS G2 G1 ■BDS B1l B2l

Sensitivity

Tracking

-163dBm

Reacquisition

-147dBm

Time-To-First-Fix¹

Cold Start

≤35 s

Warm Start

20s

Hot Start

1 s

Position accuracy²

Autonomous

2.0 m CEP

DGNSS

0.5m CEP

RTK

1cm+1ppm (Horizontal)3

Accuracy of time pulse signal

RMS

30ns

Velocity accuracy

GNSS

0.1 m/s

D-GNSS

0.05 m/s

Operational limits4

Dynamics

≤ 4 g

Altitude

18000 m

Velocity

515 m/s

Baud Rate

38400-230400 bps（Default 38400 bps）

Max navigation update rate

10Hz

1. All satellites at ≥-130dBm

2. CEP, 50%, 24 hours static, ≥-130dBm, > 8SVs

3. Based on 30km, the accuracy error increases by 1cm every 10km from the base station

4. Assuming Airborne < 4 g platform
Pinouts Serial+I2C Port
Pin Label Description
1 VCC
  • Module Power Supply, 3.6-6.0 VDC, 5.0V recommended.
  • 5V Power from Serial Port (GPS or telemetry) of FC is ideal.
2 RX1 UART 1 Data Input, TTL
3 TX1 UART 1 Data Output, TTL
4 SCL Compass I2C SCL Pin
5 SDA Compass I2C SDA Pin
6 GND GND
Pinouts Serial+I2C Port
Pin Label Description
1 VCC
  • Module Power Supply, 3.6-6.0 VDC, 5.0V recommended.
  • 5V Power from Serial Port (GPS or telemetry) of FC is ideal.
2 RX2 UART 2 Data Input, TTL
3 TX2 UART 2 Data Output, TTL
4 GND GND
 
For using as RTK Base use USB-C connector.
Using as RTK Base with Survey antenna with Laptop
  • Use software like Mission Planner or QGroundControl for survey and sending RTK data to flight controller over telemetry
  • Advanced users can also use it with other softwares like U-Center, RTK2Go, SNIP etc. on serial connection
Using as RTK Base with Survey antenna with Android RC / Tablet / Phone
  • Use QGroundControl or Mission Planner android app for sending data to drone
  • It can be used with Android base RC or All in one controller like Herelink, Siyi MK15 / MK32, Skydroid H12 etc.
  • For survey 3rd party app like GNSS master can be used.

Customers also purchased