1. Home
  2. Power Supply
  3. Industrial Power Supply
  4. GenX RTK F9P Air Lightweight GNSS module for drones with integrated helical antenna and compass

GenX RTK F9P Air Lightweight GNSS module for drones with integrated helical antenna and compass

Model: RKI-3023
Availability : In Stock
₹20,407.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹3673.26 available. (Know More)
Warranty : None
Free Economy Shipping option available
QTY :

GenX RTK F9P Air is a light weight 20 gram RTK GNSS module with U-blox ZED-F9P, QMC5883 Compass and inbuilt high gain helical antenna. The whole package is packaged in lightweight but strong enclosure which makes it dust and splash resistant and easy to mount on drone body.
The GenX RTK F9P Air can receive and track multiple GNSS systems. With state of the art multi-band RF front-end architecture, all four major GNSS constellations (GPS, GLONASS, Galileo, and BDS) can be acquired simultaneously. All satellites in view can be processed to provide an RTK navigation solution when used with correction data from RTK base. The module communicates on multiple protocols like UBX, NMEA and RTCM and can be easily integrated with any modern flight controller.
It can be configured for concurrent GPS, GLONASS, Galileo, BDS, QZSS, and SBAS reception to provide a high-performance position reporting and navigation solution. It provides exceptional sensitivity and acquisition times, and interference suppression measures enable reliable positioning even in difficult signal conditions.

GenX RTK F9P Air

GenX RTK F9P Air

GenX RTK F9P Air

GenX RTK F9P Air

 

Specifications

GNSS module

U-blox ZED-F9P

Compass

QMC5883

Weight

20g

Application

Rover (Aircraft) or Base

Receiver type

■ GPS L1C/A L2C ■Galileo E1 E5b

■ GLONASS G2 G1 ■BDS B1l B2l

Sensitivity

Tracking

-163dBm

Reacquisition

-147dBm

Time-To-First-Fix¹

Cold Start

≤35 s

Warm Start

20s

Hot Start

1 s

Position accuracy²

Autonomous

2.0 m CEP

DGNSS

0.5m CEP

RTK

1cm+1ppm (Horizontal)3

Accuracy of time pulse signal

RMS

30ns

Velocity accuracy

GNSS

0.1 m/s

D-GNSS

0.05 m/s

Operational limits4

Dynamics

≤ 4 g

Altitude

18000 m

Velocity

515 m/s

Baud Rate

38400-230400 bps（Default 38400 bps）

Max navigation update rate

10Hz

1. All satellites at ≥-130dBm

2. CEP, 50%, 24 hours static, ≥-130dBm, > 8SVs

3. Based on 30km, the accuracy error increases by 1cm every 10km from the base station

4. Assuming Airborne < 4 g platform

GenX RTK F9P Air

Pinouts
Pin Label Description
1 GND Ground
2 TX2 UART 2 Data Output, TTL
3 RX2 UART 2 Data Input, TTL
4 SDA Compass I2C SDA Pin
5 SCL Compass I2C SCL Pin
6 TX1 UART 1 Data Output, TTL
7 RX1 UART 1 Data Input, TTL
8 VCC Module Power Supply, 3.6-6.0 VDC, 5.0V recommended.
5V Power from Serial Port (GPS or telemetry) of FC is ideal.
 
Usage with Ardupilot / PX4 / Pixhawk Based Flight Controllers
  • Connect module to serial port of flight controller

GenX RTK F9P Air

Flight Controller Serial Port

VCC

VCC

GND

GND

TX1

RX

RX1

TX
  • If using with Pixhawk Cube use GPS 2 Port, If no other GPS is connected on GPS 1 port set parameter SERIAL3_PROTOCOL to -1 or anything else than 5. You can also use Telemetry 1 or Telemetry 2 Port but make sure no other ports protocol is set to 5(GPS) except the one on which GPS is connected.
  • Without RTK Base correction data module can be used as normal GPS (GNSS) module.
  • When RTK Base is available the correction data can be sent to flight controller through ground station software (Mission planner / QGroundControl) and telemetry link.

 

Using module for GPS Altitude (Instead of barometer)
  • Normal GNSS modules do not provide good accuracy in vertical direction making it unusable for altitude control and that’s why most flight controllers use barometers which measures atmospheric pressure to control altitude of aircraft.
  • Change in temperature and pressure may cause large drifts in altitude in few minutes. Sometimes this may lead to inaccurate data or crash in challenging terrains.
  • When RTK is available GPS can be used for GPS altitude as first option, this helps achieve control over altitude in centimeter level precision.
  • However it should be set to barometer when no RTK correction data is present.
  • For more details see : https://ardupilot.org/copter/docs/common-gps-for-alt.html

 

Using 2 modules for GPS Yaw (Instead of Magnetometer)
  • For high power drones or ground vehicles where magnetic interference from motors, ESCs or external things like power line can harm stability of drones or ground vehicles, GPS yaw can be used to estimate heading.
  • In this case 2 GPS modules are used on the drone and RTK base is optional. All processing is done onboard making it a more reliable system.
  • Out of 2 modules used on board, one acts and moving base and second acts as rover.
  • This is advance feature and should be used with caution. More documentation here : https://ardupilot.org/copter/docs/common-gps-for-yaw.html

Datasheet GenX F9P RTK Air

Customers also purchased