BLHELI_ESC BL32- 55A 4IN1 2-6S ESC is a completely digital signal, Oneshot and multishot are analogue signals. During the use of analogue signals, ESC hardware and software will generate some noise, which is clutter. If there are too many clutter, you need to add a filter capacitor or resistor to hardware filtering. (Off-topic, those who need to remove the capacitor is probably the case) and it is a digital signal, do not need to calibrate the ESC, no filtering is required during the transmission!
It is designed for multi-axis UAV transition machines. Accurate speed control, accurate signal acquisition. ESC uses 32-bit ARM Cortex MCU STM32F051 48MHZ processor, 2048-level throttle resolution, unique algorithm control and strong anti-interference ability. You can upgrade the firmware online or change the configuration parameters via the signal line.
ESC comes with a current sensing module that can cooperate with flight control to detect current value. ESC adopts an adaptive control system and is compatible with most motors on the market. The PCB board adopts thickened 6-layer treatment, the internal resistance heat generation is small, the layout of the components is optimized, and the installation is more convenient.
- Power supply voltage: 2-6S (7.4-26V)
- Constant Current: 55A
- Supports: Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125,Multishot, PWM control signal
- BEC: No built-in 5V BEC output
- Dimensions: 8 × 5 × 1 cm(LxWxH)
- Weight: 10.9g
- Firmware: BLHELI 32 ESC
- Model: BS-55A ESC
- 1 x BLHELI_S BL32- 55A 4IN1 2-6S ESC