The Rhino Planetary Geared Quad Encoder 200 RPM DC Servo Motor is a robust encoder based DC servo system which is a unique system which enables you to get the stall torque of the motor even even while using the motor at lower RPM. For RPM starting from 0 to maximum rpm possible as per gear box ratio, you can achieve the stall torque of the motor. Using a simple DC motor it is not possible to achieve desired torque at lower speeds because as you vary the input provided to the motor drive the output power is reduced.

 

However the Rhino High Torque Quad Encoder motors along with the DC servo drive the encoder feedback is a unique system which will allow to achieve maximum rated torque at lower speeds along with perfect position and multi motor co-ordination. This motor is perfect for accurate speed applications and multi motor robotic platforms where speed and position co-ordination is important. This motor serves for critical applications where two motors working at same speeds are important for the working of the system.

 

Also it gives a very fine setting to achieve required speed control using the high number of counts which are available with the coupled encoder. The High Torque Quad Encoder coupled with the base motor is a quad encoder which provides 5200 Counts per Revolution (CPR).

 

This high number of counts enable a mission critical applications for fine control of speed and settings. To control the position of the motor and the speed, our DC Servo Drive RMCS -2303 is recommended to be used with this.