The Rhino Planetary Geared Quad Encoder 100 RPM DC Servo Motor is a robust encoder based DC servo system which is a unique system which enables you to get the stall torque of the motor even even while using the motor at lower RPM. For RPM starting from 0 to maximum rpm possible as per gear box ratio, you can achieve the stall torque of the motor. Using a simple DC motor it is not possible to achieve desired torque at lower speeds because as you vary the input provided to the motor drive the output power is reduced.

 

However the Rhino High Torque Quad Encoder motors along with the DC servo drive the encoder feedback is a unique system which will allow to achieve maximum rated torque at lower speeds along with perfect position and multimotor co-ordination. This motor is perfect for accurate speed applications and multimotor robotic platforms where speed and position co-ordination is important. This motor serves for critical applications where two motors working at same speeds are important for the working of the system.

 

Also it gives a very fine setting to achieve required speed control using the high number of counts which are available with the coupled encoder. The High Torque Quad Encoder coupled with the base motor is a quad encoder which provides 9048 Counts per Revolution (CPR).

 

This high number of counts enable a mission critical applications for fine control of speed and settings. To control the position of the motor and the speed, our DC Servo Drive RMCS -2303 is recommended to be used with this.

Along with the High Torque Quad Encoder, the Rhino Heavy Duty Planetary Gear Box DC motor is a category best motor with an amazing torque to weight ratio and performance parameters. The high quality precision metal gear box in the motor provides with long life and good performance as detailed in the product

 

 

Features

• 100 RPM 12V Rhino High Torque Quad Encoder DC Geared Motor,High Torque Quad Encoder, Metal Planetary Gearbox and Metal Gears
• 18000 RPM base motor
• 4 stage gearbox for optimum high torque operation
• Gear Box breaking torque 100 kgcm,
• for continuous load do not exceed 75 kgcm
• Motor rated Torque is 25kgcm continuous load for maximum efficiency, and stall torque is higher than 100 kgcm. It is recommended to use this motor at rated torque for best performance and life of the motor.
• Shaft is D type with total lenght of 16 mm and D shape in 12 mm.
• 6mm Dia shaft with M3 thread hole for tight mounting.
• Shaft can be coupled using CNC coupling 6 mm or using fixed coupling as per requirement
• Back shaft length is 9 mm
• Gearbox diameter is 32 mm.
• Motor Diameter 28.5 mm
• Length 95.5 mm without shaft
• 300gm weight
• Supply Voltage : 12 V DC
• No-load current : 800 mA, Load current : upto 7.5 A(Max)

Downloads