This N20 3v 30 RPM Metal Gear Micro DC Encoder Motor with Precious Metal Brush is a light weight high torque motor suitable for a variety of industrial, home appliances and hobby applications as well. This motor is equipped with an all metal gearbox assembly which provides an amazing torque for this size of the motor. Also the brushes used in the motor provided by Robokits are precious metal brushes and not carbon brushes. This ensures a higher working life of the motor compared with the motor with carbon brushes.
As compared to other motors in this size either with metal or plastic gears, the N20 all metal geared motor has a much higher torque to size ratio. The BO motor series 1 and series 2 and the centre shaft 12 V motors available in the market are widely used for small industrial applications or robotic projects. However when comparing the torque, sturdiness, reliability and working life, the N20 motor beats all the other motors by a huge margin.
The specifications mentioned below are a testament to the same. The N20 motor is ideal for small IOT ( Industrial IOT) products like electric lock, webcam pan tilt and other similar actuator products which need good torque in limited space and in less weight. For the hobby segment products like robotic cars, micromouse, electric boat and all small motor related projects, where power consumption is a concern along with optimal pricing, the N20 all metal gear motor is a perfect fit.
This N20 encoder motor can help to accurately control the position of the motor. This N20 Encoder motor is compatible with our PID Servo controller Drive. For Information of drive
Click here
Motor Specifications:
- Model No: GA12 N20
- Motor Type: Center Shaft DC Encoder Geared Motor
- Base Motor RPM: 30000
- RPM at output shaft (3V): 30
- Rated Voltage: 3V DC
- Gear ratio: 1:250
- No Load Current: 10 mA
- Rated Current: 40 mA
- Stall Current: 1 A
- Rated Torque: 0.24 Kgcm
- Stall Torque: 2 Kgcm
- Shaft Type: D-type Single Side
- Shaft Diameter (mm): 3mm
- Shaft Length (mm) : 9mm
- Weight (gm): 15
Encoder Specifications:
- Encoder Type: Quad
- PPR: 7
- CPR: 7 x 4 = 28
- CPR at output shaft: 7000
Encoder Connections:
- Red – Motor +
- White – Motor -
- Yellow – Encoder B
- Green – Encoder A
- Black – Vcc (5 V)
- Blue – Gnd
Package Includes:
- 1 x GA12-N20-3v 30 RPM ALL Metal Gear Micro DC Encoder Motor with Precious Metal Brush
