RMCS-3001 RS485 modbus is Rhino Motion Controls introductory Brushless low voltage (15–48 V) DC drive designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up. The ENABLE, BRAKE and DIRECTION inputs are optically isolated. These inputs work with 2.5V to 5V logic drive signals. Motor will run on application of +ve input supply to ENABLE pins.

 

To facilitate the direction change of Motor shaft, dedicated DIR pin is given. After applying the +ve input supply to DIR pin, power reset is required. BRAKE feature provided for braking the motor rotation. This drive has speed feedback (Hz) and current feedback (A). This drive have option to control the length of motion, once the length of that motion is exceed the motor will automatically enter brake condition. There is a function in the drive for setting the Modbus Slave Address from 1 to 247 using MODBUS Tool Device (Software Setting).