The RHINO SOLAR PUMP VFD is Designed to Deliver Water in Remote Locations Where Access to Reliable AC Power May Be Uncertain or Non-existent Also It is Suitable for All the Locations. This Controller Operates Seamlessly on DC and AC Power both. This Series of AC and DC Motor Drive with abundant features, Including multi-function I/O terminal, V/f control and auto-torque/auto-slip compensation, built-in digital keypad that can be connected to VFD with extended wire.
During Sunny Days, the Solar Pumping System can Consistently and Efficiently Move Water. In Instances Where There Are No Batteries or Other Energy Storage Devices, It is Advisable to Pump Water to a Reservoir for Future Use. Water Sources can Range from Natural Bodies Like Rivers, Lakes, and Wells to Specialized Waterways. To Manage the Pump's Operation Effectively, a Float Switch can Be Installed in the Water Tower.
The Rhino V4 Monoblock 3HP 15-Stage Three Phase Pump is efficient water pumping. With a 2HP motor, this Three-phase pump operates at 160V and 50Hz, offering steady performance. It is 15-stage head ensures water is lifted effectively, making it perfect for deeper sources. Achieving an impressive 60 liters per minute flow rate, it's suitable for a range of applications. The compact monoblock design simplifies installation, while its robust build guarantees durability. a reliable, cost-effective solution for homes, farms, and industrial facilities.
Solar VFD Features:
- It operates on 3 Phase AC Induction Motor, using the V/F (Voltage/Frequency) Method.
- It can accept DC power ranging from 120(Vdc) to 450(Vdc), and for AC power, it directly takes 220(Vac).
- Continuous and Highly Efficient Power Tracking at 99%
- Ideal for 1HP to 3HP AC Induction Motor and BLDC Motor For DC.
- Rated to Handle up to 2.2kw Input DC Power with 10amps of Continuous Input Current.
- Operating Flawlessly within an Ambient Temperature Range of 90 Celsius.
- Switch is given on the back to turn on and off the AC supply.
- This System Prioritizes Safety with Built-in Features Such as Reverse Polarity Protection, Over-Temperature Safeguards, Under-Voltage Protection, and Overload Protection.
- Float Sensor Inputs can be Connector to Control the Water Level in a fixed Tank System. In case a Float Sensor is not intended to be used Please Hook up a Short Circuit Wire between 0V / Reference and TL Input.
- Weight : 3kg
Specifications:
- Model: AC
- Bore Size: 100mm
- Delivery: 50mm
- Stage 15
- Duty Point Head: 60 mtr
- Discharge 125 Ipm
- Overall Efficiency: 28%
- Rated Speed: 2820 rpm
- Operating Head Range 45 mnt to 70 mtr
- Volts: 160
- Phase: 3
- Motor Cat B, Duty S1, 50 Hz
- Capacitor Start: Run
- DC/AC (W.M)
- Leakage Current: 100mA
- Motor Rating HP/KW: 3.0/2.2
- Max Current: 13Amp
- Min Submergence: 1 mtr
- Connection: Solar
Pump Application:
- Solar Pumping System
- Domestic Water Supply
- Sprinkle and Drip Irrigation System
- Fountains, Laen, Garden
- Unshaped any Crooked 4" Borehole
- Dairies, cattle and poultry Farms
Power Terminals:
| Terminal Name |
Description |
| P+ |
Positive DC Input from Panel (MC4 Connector) |
| P- |
Negative DC Input from Panel (MC4 Connector) |
| AC |
Input P (Brown) |
| AC |
Input N (Black) |
| AC |
Earthing (Green) |
Motor Terminals:
| Terminal Name |
Description |
| U |
Motor Phase 1 (Red) |
| V |
Motor Phase 2 (Yellow) |
| W |
Motor Phase 3 (Blue |
| Terminal No |
Terminal Name |
| TH |
Tank High Input (Red) |
| TL |
Tank Low Float Sensor Input (Green) |
| GND |
Reference Voltage for Float Sensor (Black) |
Display and Buttons:
| Button Name |
Function |
| Set |
Saves the Parameters to Memory |
| Enter |
Moves to the Next Parameter |
| Up |
Increases the Parameter Value |
| Down |
Decreases the Parameter Value |
| Switch |
Changes the LED Segment Display |
| ON/OFF |
To turn ON or turn Off the inverter |
General Parameters:
| Parameter |
Name |
Description |
Value |
| P2 |
NO LOAD FREQUENCY |
The Frequency at No-Load error |
40 |
| P5 |
MOTOR PEAK CURRENT LIMIT |
Sets the Peak Current for Motor Coil |
450 |
| P7 |
PI LOOP OVERALL GAIN |
Peak Gain Setting for the PI loop |
515 |
| P10 |
V/F MOTOR RATED VOLTAGE |
The voltage at the rated frequency |
72 |
| P11 |
V/F MOTOR RATED FREQUENCY |
The rated frequency of the motor |
45 |
ERROR Codes Description:
| ERROR on Display |
NAME |
DESCRIPTION |
 |
ERROR_STATE_NOERROR |
Motor is Off, Not Error |
 |
ERROR_STATE_LOWPWR |
Inverter Auto Shut due to low input power |
 |
ERROR_STATE_LOWVLT |
Inverter Auto Shut due to low input voltage |
  |
ERROR_STATE_MTRJAM |
V/F Ratio Incorret |
 |
ERROR_STATE_CFAULT |
High Current, motor wire short or output wire short |
 |
ERROR_STATE_VFAULT |
Inverter Circuit Failure due to High Voltage |
 |
ERROR_STATE_NOLOAD |
Motor Not drawing sufficient Power |
 |
ERROR_STATE_OVHEAT |
Inverter Auto Shut due to Over Temperature |
 |
ERROR_STATE_LOWSTR |
Inverter Auto Shut due to low start-up power |
 |
ERROR_STATE_PHASE |
Incorrect Motor, Connection not proper or wire loose |
System Diagnostics:
The solar pump controller continuously monitors system performance and detects a variety of abnormal conditions. In many cases, the controller will compensate as needed to maintain continuous system operation; however, if there is high risk of equipment damage, the controller will protect the system and display the fault condition. If possible, the controller will try to restart itself when the fault condition subsides. See Diagnostics and Troubleshooting section for a list of Fault Codes and corrective actions.
Motor Soft-Start Normally:
When there is a demand for water and power is available, the solar pump controller will be operating. Whenever the solar pump controller detects a need for water, the controller always “ramps up” the motor speed while gradually increasing motor voltage, resulting in a cooler motor and lower start-up current compared to conventional water systems. Due to the controller’s soft-start feature this will not harm the motor. It will help to extend the motor lifetime.
Over Temperature Fold back:
The solar pump controller is designed for full power operation from a solar array in ambient temperatures up to 90°C. In excess of 90°C temperature conditions, the controller will switch off the output.
by Aashish t.
यह VFD AC + DC दोनों इनपुट स्वीकार करता है, जो मेरे लिए बड़ा प्लस पॉइंट था क्योंकि ग्रिड कनेक्शन कभी-कभी कट जाती है। RHINO का सपोर्ट टीम भी जल्दी रिस्पॉन्ड करता है। अगर पैनल सेटअप ठीक हो तो काम बहुत smooth चलता है। मेरे हिसाब से छोटे-मध्यम खेत वालों के लिए एक बेहतरीन विकल्प है.
