1. Home
  2. Batteries & Chargers
  3. SkyCell LiPo Battery
  4. Lipo Charger/Charge protection
  5. SPI TFT 3.5" LCD Touch Module ILI9488 driver 480X320

SPI TFT 3.5" LCD Touch Module ILI9488 driver 480X320

Model: RKI-1342
Availability : In Stock
₹929.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹167.22 available. (Know More)
Warranty : None
Buy 2 or more pieces to get Free Shipping Option
QTY :

The ILI9488 is a 16.7M single-chip SoC driver for a- Spi TFT Touch  liquid crystal display panels with a resolution of 320(RGB) x 480 dots. The ILI9488 is comprised of a 960-channel source driver, a 480-channel gate driver, 345,600 bytes GRAM for graphic data of 320 (RGB) x 480 dots, and power supply circuit.
 
Features:
  • 3.5-inch color screen,support 65K color display,display rich colors
  • 480X320 resolution
  • Using the SPI serial bus, it only takes a few IOs to illuminate the display
  • Easy to expand the experiment with SD card slot
  • Provide a rich sample program
  • Military-grade process standards, long-term stable work
  • Provide underlying driver technical support
Specification:
Display Color RGB 65K color
Screen Size  3.5(inch)
Type TFT
Driver IC ILI9488
Resolution 480*320 (Pixel)
Module Interface       4-wire SPI interface      
Active Area (AA area) 48.96x73.44(mm)
Module PCB Size 56.34x98(mm)
      Operating Temperature       -20℃~60℃
Storage Temperature -30℃~70℃
VCC power voltage 3.3V~5V
Logic IO port voltage 3.3V(TTL)
Power Consumption TBD
 
Pin outs:
VCC 5V/3.3V power input
GND Ground
CS LCD chip select signal, low level enable
RESET LCD reset signal, low level reset
DC/RS LCD register / data selection signal,

high level: register, low level: data
SDI(MOSI) SPI bus write data signal
SCK SPI bus clock signal
LED Backlight control, high level lighting,

if not controlled, connect 3.3V always bright
      SDO(MISO)      

SPI bus read data signal, if you do not need to the read function, you can not connect it.

(The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them)      
T_CLK Touch SPI bus clock signal
T_CS Touch screen chip select signal, low level enable
T_DIN Touch SPI bus input
T_DO Touch SPI bus output
T_IRQ Touch screen interrupt signal, low level when touch is detected
 
Package Includes:
  • 1 x SPI TFT 3.5" LCD Touch Module ILI9488 driver 480X320

Customers also purchased