AVR 40 Pin Rapid Robot controller board with L298 motor drivers with 2A per channel capacity. Maximum 4 DC Motors or 2 Stepper Motors can be controlled with this module. Sample programs in GCC will be available.

Note: Microcontroller, Motor driver Ic's, Programmer etc. is optional and not included in base price. Select this items from drop down menu below product image.

Robobt Controller Board Features

On Board Regulator with filters and Operating voltage from 6V - 20 V
4 LED's selectable though individual jumpers
5 Switches including reset
3 Switches on interrupt pins
Power on/off toggle switch
Motor on/off toggle switch
16MHz crystal for maximum speed
AREF setting potentiometer
Onboard LCD connector compatible to HD44780 LCD Modules
LCD brightness control
Frosted Blue Power Indicator
4 DC/2 Stepper motor driving capability
PWM pins connected to motor drivers for speed control of motors
Full Speed/PWM Speed control selection jumpers
4 ADC/Standard servo compatible connectors
All Pins accessible through male header pins
Serial Programmer and PC-MCU serial link optional
2A per channel output capacity
All required connectors included.

Optional items

LCD Module HD44780 compatible
AVR Microcontroller (Selectable between ATMega16L, ATmega16 and ATMega32)
PC-MCU link selectable (Selectable between Serial and USB Port)
AVR programmer (Selectable between Serial Port, Parallel Port and USB Port Programmer)
*Serial port programmer does not work properly when LCD is connected. We recommend Parallel or USB port programmer if you are using LCD.
Links to the optional Items

GP2D12	ATMega16	ATMega32
AVR High Speed USB Programmer	AVR Serial ISP Programmer	AVR Parallel Port Programmer
PC-MCU Serial Link (Serial Port)	PC-MCU Serial Link (USB Port)	16X2 LCD With Backlight
Multipurpose IR Sensor	Remote Control	L298