10S 30A BMS
Common Port for charge/discharge
Voltage: 36V
Discharge Current: 30A
Charge Current: 15A
Can be used in 3.7V rated Li-ION Battery, not for 3.2V Rated LiFePO4
10S 30A PCM/PCB/BMS for 36V LiNCM, Li ion lithium battery pack for electric bicycle and scooter and tools Battery Accessories. It is a Battery Management System for 18650 Lithium Ion Battery Pack.The main functions of BMS are over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection of Battery pack of 3.7V rated Li-ion Battery.It Uses top quality (A-level) protective integrated circuit IC,Strong load ability,use high voltage resistance,low inner resistance power Mosfet.The heat sink will greatly help cooling.IC itself has power balancing function.
The circuit is simple and reliable.
Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection .
Long time short circuit of the load won’t affect the PCB and the battery.
Temperature protection during charging and discharging.
PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
Model:10S (3.7V rated Li-ION Battery not for 3.2V Rated LiFePO4)
10S 36V 30A bms is used for 10 series 36V battery pack
Common Version : common port for charge/discharge
constant discharge current: 30A
Extreme low power consumption. The consumption of the whole device is less than 50uA.
10S 36V
Detail
Specifications
Discharge
Maximal Continuous Discharging Current
30A
Peak Discharging Current
60A
Over Current Protection Current
Charge
Charging Voltage
42V (36v battery)
Charging Current
15A
Over charge protection
Over Charge Detection Voltage
4.25±0.025V
Over Charge Detection Delay Time
0.5S
Over Charger Release Voltage
4.19±0.05V
Cell balancing
Cell balancing Detection Voltage
4.18V
Cell balancing Release Voltage
Cell balancing Current
35±5mA
Over discharge protection
Over Discharge Detection Voltage
2.8±0.05V
Over Discharge Detection Delay
Time 0.5S
Over Discharger Release Voltage
3.0±0.05V
Over current protection
Over Current Detection Voltage
150mV
Over Current Detection Delay
Time 9MS
Over Current Protection Condition
Disconnect the load
Short Protection
Detection Condition
Exterior Short Curcuit
Detection Delay Time
250uS
Release Condition
Temperature Protection
65ºC or 75ºC
optional
Internal Resistance
MOSPET
≤10mΩ