Ideal Motor for CNC machines and other machinery. Standard NEMA42 frame size. 110Kgcm bipolar configuration motor with LEADSHINE D860H | MA860H STEPPER DRIVER 7.2A. Ideal performance at 5Amp configuration.
The D860H | MA860H is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.
Note: ENA function is not work in this Driver.
Features
- Step Angle : 1.8 Degree
- Configuration: 4 wire bipolar stepper motor
- Holding Torque: 110kgcm bipolar mode
- Phase current : 5.5Amp
- Resistance/phase: 0.7ohm
- Inductance/Phase : 9.85mH
- Rotor inertia: 5500 gcm2
- Length (L): 99mm
- Shaft Dia : 19mm
- Shaft Length : 55.37mm
- Weight: 5000 grams
Leadshine Drive Specifications:
- DM860H | DMA860H microstepping drive
- Input voltage Up to +80VAC or +110VDC
- Output current Up to 7.2A
- Pulse input frequency up to 300 KHz
- Suitable for 2-phase and 4-phase motors
- Automatic idle-current reduction
- Over-voltage, over-current protection
- Support PUL/DIR and CW/CCW modes
- Operating Temperature : 70 C
Power and Motor Terminal Assignments:
|
Terminal No.
|
Terminal Name
|
Description
|
|
Terminal 1
|
AC
|
Power supply, 18~80 VAC or 24~110 VDC, Including voltage fluctuation
|
|
Terminal 2
|
AC
|
and EMF voltage. Recommended 18~60VAC or 24~85VDC
|
|
Terminal 3
|
A+
|
Motor Phase A+
|
|
Terminal 4
|
A-
|
Motor Phase A-
|
|
Terminal 5
|
B+
|
Motor Phase B+
|
|
Terminal 6
|
B-
|
Motor Phase B-
|
Pulse and Direction Inputs:
|
Terminal No.
|
Terminal Name
|
Description
|
|
Terminal 1
|
PUL+
|
Pulse +ve input
|
|
Terminal 2
|
PUL-
|
Pulse -ve input
|
|
Terminal 3
|
DIR+
|
Direction +ve input
|
|
Terminal 4
|
DIR-
|
Direction -ve input
|
|
Terminal 5
|
ENA+
|
Enable +ve input
|
|
Terminal 6
|
ENA-
|
Enable -ve input
|
Package Includes:
- 1 x NEMA42 STEPPER MOTOR 110KGCM TORQUE
- 1 x DMA860H | MA860H MICROSTEPPING STEPPER DRIVER 80VAC OR 110VDC 7.2A
Downloads
User Manual
Motor Datasheet
