The DigitalDream CNC has engaged in the numerical control industry for 7 years, specializing in the research, development and production work of various CNC(Computer Numerical Control)systems with high quality, high reliability. It can produce the common Brushless DC motor, Stepper motor driver as well as the 1 axisCNC system to 4 axesCNC system.
The DDCSV2.1 is the 4 axis and 4 axes motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
The DDCSV2.1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation.
The panel layout structure of DDCSV2.1 is rational. The common off-line operation can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set. This specificationintroduces the operation method of caving machine`s special off-line CNC system, DDCSV2.1 and the machine tool connection as well as operation specification. By lots of graphical representation and examples, the uses can quickly learn to use the DDCSV2.1 CNC system.
- Ordinary digital input interface of 16-circuit and 3-circuit optocoupler coupling isolation
- Output interface of 0-10V spindle control port with analog quantity (can be modified as PWM output)
- Support 4 axis stepper motor and server motor control, the highest pulse output of controlling single axis is 500 KHz
- ARM9 main control chip, FPGA core algorithm chip
- 4.3 inches TFT screen, resolution ratio 480*272
- Control by 17 operational keys, which could finish the common off-line operation
- 18V-32V power supply input, the current capacity is required not to be lower than 0.5A
- Support USB flash disk to read the G code, the size of G code file has no requirement
- Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market
- Support the panel key with single-axis manual operation, manual step and CONT operation
- Support the operation of quickly specifies the running position
- Support the multi coordinate systems (with automatically saving function in case of power cut)
- Support the function of saving data automatically after power down (press the start to automatically save the data in the operation, automat
- 1 x 4 Axis Motion Controller
- 1 x 4GB USB Flash Drive
- 1 x USB Extension Cable
Datasheet DDCS v2.1