Easy to Use, Versatile Robotics Kits...

Categories


18DOF 6Legged Intelligent Hexapod DIY w/t 18 Servo Controller



Starting at: Rs.22,400

Please Choose:

Servo Upgrade to RKI-1211




Availibility : In Stock
Warranty : None

Model : RKI-2526
Add to Cart:


  • Description
  • Downloads & Media
  • Reviews

It is an aluminum part without any servo and control plate . A single leg unbend about 23 cm, body shell is about 17.5 cm long, about 15.5 cm wide. Each leg has three joints, robot can complete forward, backward, turn, dancing, climbing and can perform all kinds of action.

Arduino Uno R3 based USB 18 Servo Controller is ideal for making Autonomous and PC based systems which run over Hobby Servo motors. The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system. It also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous.


Features

  • 3mm aluminum alloy material, high intensity
  • Robot shell with installation hole for switch and controller, very convenient
  • 18DOF, each leg 3DOF joint
  • Leg length: 23cm(stretched)
  • Body shell size: 17.5*15.5cm(L*W)
  • Could realize go forward, backward, turning, dancing, climbing movements, etc.
  • Color: Black

This Package Includes


Servo Motor Specifications

  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8-6.0 Volts
  • Operating Temperature Range: -10 to +60 Degree C
  • Operating Speed (4.8V): 0.18sec/60 degrees at no load
  • Operating Speed (6.0V): 0.14sec/60 degrees at no load
  • Stall Torque (4.8V): 14kg/cm
  • Stall Torque (6.0V): 16kg/cm
  • 360 Modifiable: Yes
  • Potentiometer Drive: Indirect Drive
  • Bearing Type: Double Ball Bearing
  • Gear Type: All Metal Gears
  • Connector Wire Length: 12"
  • Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
  • Weight: 48gm

Servo Controller Features:

  • Bluetooth interface for wireless control of robots
  • Controls 18 hobby servos from PC and Microcontroller
  • USB interface
  • Comes Pre-loaded Arduino Uno bootloader
  • Software exports servo sequences to Arduino Uno for running servo sequences
  • Independent range setting for each servo
  • Independent offset, Maximum, Minimum and Direction setting for each servo
  • 0.5-microsecond resolution
  • 50 Hz update rate
  • Small size of 80 X 47 mm
  • Plug and Play, Auto detection of hardware
  • Easy to use software
  • Servo sequencer with speed, delay, goto and many other features
  • Home and neutral position setting
  • Easy to install USB driver and Application software

*Note: We Recommend RKI-1211 Metal Gear Standard Servos for all electronic kits


18DOF 6Legged Intelligent Hexapod DIY w/t 18 Servo Controller
Rs. 22400 In Stock
It is an aluminum part without any servo and control plate . A single leg unbend about 23 cm, body shell is about 17.5 cm long, about 15.5 cm wide. Each leg has t
Be the first to write a review.  Write a Review.



Content
Servo Brackets Availabe

Build any type of Robot from Servo Erector brackets set from Robokits.

 

Click Link Below.

http://robokits.co.in/robot-parts/servo-brackets

 

Ships Same working day.