The APDS-9930 provides an I2C interface-compatible ambient light sensor (ALS) and a proximity sensor with an infrared LED in a single 8-pin package, where the ambient light sensor uses a dual photodiode to approximate 0.01 lux illumination. This module can be used in applications where a motion / human gesture is to be detected from behind a glass from close range uptill 100mm. The proximity sensor is fully calibrated for 100 mm object detection even behing glass, eliminating factory calibration requirements for terminal and subassemblies.

Features:

• Optical modules integrated with ALS, infrared LEDs and proximity detectors
• Ambient Light Sensing (ALS)
  - Approximate human visual response
  - Programmable interrupt capability with upper and lower thresholds
  - Up to 16-bit resolution
  - High sensitivity operation behind dark glass
  - 0.01lux low lumen performance
• Proximity detection
  - Fully calibrated to 100 mm detection
  - Integrated infrared LED and synchronous LED driver
  - Eliminates factory calibration of the proximity sensor
• Programmable wait timer
  - Wait state power consumption - 90μA typical
  - Programmable range from 2.7 ms to more than 8 seconds
• I2C interface compatible
  - Up to 400kHz (I2C fast mode)
  - Dedicated interrupt pin
• Sleep Mode Power - 2.2μA typical
• Small package 3.94 (L) x 2.36 (W) x 1.35 (H) mm