1. Home
  2. Robotic arm 5 DOF DIY Kit with USB Servo Controller Board

Robotic arm 5 DOF DIY Kit with USB Servo Controller Board

Model: RKI-4086
Availability : In Stock
  • Robotic arm 5 DOF DIY Kit with USB Servo Controller Board
  • Robotic arm 5 DOF DIY Kit with USB Servo Controller Board
  • Robotic arm 5 DOF DIY Kit with USB Servo Controller Board
  • Robotic arm 5 DOF DIY Kit with USB Servo Controller Board
₹11,500.00
Current Reviews: 0 Add Your Review
GST Input Tax Credit @ 18 % of ₹2070 available. (Know More)
Warranty : None
Free Economy Shipping option available
Servo Upgrade
QTY :

The Robotic Arm has a 180° rotation angle and can provides 5 degrees of freedom. High Torque Standard Servo Motor with Metal Gears. Provides 11kg/cm at 4.8V, 13.5kgcm at 6V and 16kg/cm at 7.2V.
 
NOTE:-In this kit metal horn is not included . because metal horn is not compatible with RKI-1204 motor.
Features:
  • Degree : 5 degree of freedom
  • Material: 3mm Engineered Material
  • Robotic arm weight: 1.25Kg
  • Servo: Metal Gear Standard Servo Economy
  • With Graphical User Interface software for programming the robotic arm moves
  • All movement joints are using high quality bearings with good precision
  • Height: 30cm
  • Maximum Opening: 21mm
  • For hobbyists, robot competition and Kids
  • Pay load: 125g
  • Robotic Arm reach: 35cm
  • Accuracy repeatedly within 5mm
 
Servo Features:
  • Required Pulse: 3-5 Volt Peak to Peak Square Wave
  • Operating Voltage: 4.8-7.2 Volts
  • Operating Temperature Range: -10 to +60 Degree C
  • Operating Speed (4.8V): 0.18sec/60 degrees at no load
  • Operating Speed (6V): 0.16sec/60 degrees at no load
  • Operating Speed (7.2V): 0.14sec/60 degrees at no load
  • Stall Torque (4.8V): 11kg/cm
  • Stall Torque (6V): 13.5kg/cm
  • Stall Torque (7.2V): 16kg/cm
  • 360 Modifiable: Yes
  • Potentiometer Drive: Indirect Drive
  • Bearing Type: Double Ball Bearing
  • Gear Type: All Metal Gears
  • Connector Wire Length: 12"
  • Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm)
  • Weight: 56gm

 

18 Servo Controller Features:
  • Bluetooth interface for wireless control of robots.
  • Controls 18 hobby servos from PC and Microcontroller.
  • USB interface.
  • Comes Pre-loaded Arduino Uno boot loader.
  • Software exports servo sequences to Arduino Uno for running servo sequences.
  • Independent range setting for each servo.
  • Independent offset, Maximum, Minimum and Direction setting for each servo.
  • 0.5-microsecond resolution.
  • 50 Hz update rate.
  • Small size of 80 X 47 mm.
  • Plug and Play, Auto detection of hardware.
  • Easy to use software.
  • Servo sequencer with speed, delay, goto and many other features.
  • Home and neutral position setting.
  • Easy to install USB driver and Application software.

 

Package Includes:

 

 

 

 

Customers also purchased