This robot includes one head, one main body part, two arms and two legs. It could finish walking, squat, turning, side slide movements, dance and can do more complicated movements. If interfaced with related sensors, it could climb stairs, do line tracking etc.
1mm aluminum alloy structure, light weight and high strength.
The Servo motor is specially made for robotics with custom design and dual shaft. Also designed to work on 7.4V li-Ion battery.
Note : Image shown is only for reference may colour of chasis kit can be changed
Specifications:
- Height: 365mm
- Weight: 1650g
- Joints: 17 joints
Servo Motor Specifications:
- Dimensions: 40.0mm B:20.0mm C:40.5mm
- Weight: 59g
- Gear type: Metal Gear
- Limit angle: No Limit
- Bearings: 2 Ball bearings
- Horn gear spline: 25T
- Horn type : Plastic
- Connector wire: 300mm ±5 mm
- Motor Metal: brush motor
- Command signal: Pulse width modification
- Amplifier type: Digital system
- Pulse width range: 500~2500µsec
- Neutral position: 1500 µsec
- Running degree: 180°(±5°)(when 500~2500 µsec)
- Dead band width: 4 µsec
- Servo accessories pack included.
Specifications |
4.8V |
6.0V |
7.4V |
Idle current(at stopped) |
4.85mA |
7mA |
8mA |
No load speed |
0.18sec/60° |
0.16 sec/60° |
0.14 sec/60° |
Runnig current(at no load) |
160 mA |
190 mA |
230mA |
Torque |
14kg.cm |
16kg.cm |
18.2kg.cm |
Stall current |
1200 mA |
1500mA |
1900mA |
Package Includes:
- 1 x Set robot metal frame set
- 17 x Dual Shaft Servo