Loading…

0 - ₹0


ST-LINK V2 - ST-LINK Programmer for STM8 and STM32

0 out of 5 stars Write a Review.
    Buy 2 or more pieces to get Free Shipping Option
  • Availability :
  • In Stock
  • Warranty :
  • None
  • Model :
  • RKI-1347
₹1,121 (Incl. GST)
₹950 Excluding 18% GST
GST Input Tax Credit of ₹171 Available. (Know More)


Add to Cart:




  • Description
  • Downloads & Media
  • Reviews

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

Much similar in architecture for debugging, the ST-LINK/V2 and the ST-LINK/V2-ISOL share the same features like digital isolation between the PC and the target application board this allows to withstands voltages of up to 1000 Vrms.

Specifically the debugger incorporates the use of USB full-speed interface to communicate with the ST Visual Develop (STVD)  or ST Visual Program (STVP) software for STM8 application, and use of the USB full-speed interface to communicate with Atollic®, IAR™, Keil®or TASKING integrated development environments for STM32 applications.


Specifications:

  • Support STM32 SWD interface debugging
  • Support STM8 all series download
  • Support firmware auto upgrade
  • With cover case for protection, anti-dust and anti-short circuit
  • Small size: 50*28*14mm

Features:

  • 5 V power supplied by a USB connector
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable

SWIM Specific Features:

  • 1.65 V to 5.5 V application voltage supported on SWIM interface

  • SWIM low-speed and high-speed modes supported

  • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed

  • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)

  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector

JTAG/serial wire debugging (SWD) specific features:

  • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs

  • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector

  • JTAG supported

  • SWD and serial wire viewer (SWV) communication supported

  • Direct firmware update feature supported (DFU)

  • Status LED which blinks during communication with the PC

  • Operating temperature 0 to 50 °C

  • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only


Package Includes:

  • ST-LINK V2 Emulator
  • Mini USB T-plug cable
  • Dubond cable 10pcs


Downloads

Programmer_Manual



ST-LINK V2 - ST-LINK Programmer for STM8 and STM32
Rs. 1121 In Stock
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/seri
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

Adaptor PCB - QFP32 TQFP32 LQFP32 EQFP32 to DIP32

Adaptor PCB - QFP32 TQFP32 LQFP32 EQFP32 to DIP32

Relay 12V, Sugar Cube (G5LE)

Relay 12V, Sugar Cube (G5LE)

PIC USB ICSP Programmer

PIC USB ICSP Programmer

CP2102 USB UART module

CP2102 USB UART module


TFT Touch LCD Screen for Raspberry Pi 3.2 Inch

TFT Touch LCD Screen for Raspberry Pi 3.2 Inch

Raspberry Pi HDMI 7Inch LCD Capacitive Touchscreen 10point Touch

Raspberry Pi HDMI 7Inch LCD Capacitive Touchscreen 10point Touch

PICKIT3 USB PIC Programmer/Debugger

PICKIT3 USB PIC Programmer/Debugger

RFID Reader/Writer 13.56MHz RC522 (Arduino Compatible)

RFID Reader/Writer 13.56MHz RC522 (Arduino Compatible)




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!