Loading…

0 - ₹0.00


Mega Torque DC Planetary Geared Encoder Servo Motor 250W 750RPM 18VDC 39Kgcm

0 out of 5 stars Write a Review.

Please Choose:

Motor Driver




    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • None
  • Model :
  • RMCS-2012
₹7,788 (Incl. GST)
₹6600 Excluding 18% GST
GST Input Tax Credit of ₹1188 Available. (Know More)


Add to Cart:



Got Better Price

  • Description
  • Downloads & Media
  • Reviews

The Mega Torque Planetary Encoder DC Geared Motor with Japanese Mabuchi motor RS-775WC as base motor of 750RPM is a unique system which enables you to get the stall torque of the motor even while using the motor at lower RPM. For RPM starting from 0 to maximum rpm possible as per gear box ratio, you can achieve the stall torque of the motor. Using a simple DC motor it is not possible to achieve desired torque at lower speeds because as you vary the input provided to the motor drive the ouput power is reduced. However the Mega Torque Planetary Encoder DC Geared Motor along with the DC servo drive the encoder feedback is a unique system which will allow to achive maximum rated torque at lower speeds alongwith perfect position and multimotor co-ordination. 42mm diameter planetary gearbox gives breaking torque upto 200kgcm. Rated torque of this motor is 39Kgcm at rated 600RPM. This motor has 500 Line optical encoder. This being a Quad Encoder requires 2000 Pulses Per Revolution of the base motor.  Gear ratio is 1:25. The Optical encoder coupled with the base motor is a quad encoder which provides 48,260 Counts per Revolution (CPR).

 

This motor is perfect for accurate speed applications and multimotor robotic platforms where speed and position co-ordination is important. This motor serves for critical applications where two motors working at same speeds are important for the working of the system. Also it gives a very fine setting to achieve required speed control using the high number of counts which are availaible with the coupled encoder. 

 

To control the position of the motor and the speed, our DC Servo Drive RMCS -2301 is recommended to be used with this.

 

DC SERVO MOTOR DRIVER 40V 20A W/T STEP/DIRECTION INPUT

 

This Drive makes it very easy to control the speed and position of the motor using step pulses and direction. The quad encoder feedback is to be provided to this drive which has a step multiplier in steps uptill 8x. So for a waveform of 10khz, you can generate 48,00,000 pulses per minute to drive the encoder motor. This is suitable for lower rpm motors which have a higher count per revolution (CPR). For higher RPM motors where gearbox ratios are lower, the multiplier settings can be set to 2x or 4x to achieve the desired count required. Hence the motor and drive alonwith a PWM and frequency control can provide a perfect solution for precision position and speed control system.


Specifications:

  • Rated Voltage: 18 VDC

  • ‚ÄčHardened slotted shaft 8MM diameter, 20MM length

  • Slot on shaft for easy coupling

  • Mounting PCB of 40mm x 4 holes

  • No load speed: 780 RPM

  • No Load current: 2.7 Amps

  • Gear Ratio: 1:25

  • Rated Torque: 39 kgcm

  • Rated Speed: 680 RPM

  • Rated Current: 18.7 Amps

  • Motor length without Shaft: 115 mm

  • Shaft Length: 27 mm

  • Motor Dia: 46 mm

  • Shaft Dia: 8 mm

  • Gearbox Breaking torque: 200 kgcm

  • Stall current: 130 Amps

  • Counts Per Revolution is 50,000(CPR) 

 

The 0.18 degree resolution optical encoder with quadrature outputs for increment and decrement counting. It will give 2000 transitions per rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up or down count. The Encoder is build to Industrial grade.

Encoder Pinouts:

Serial No.

Pinouts

Wire Color

Description

1

GND

Black

Ground should be connected to negative of supply

2

VCC

Brown

VCC should be connected to +ve 5V of supply

3

Enc A

Orange

Quadrature encoded output A

4

Enc B

Red

Quadrature encoded output B


*We recommend current controlled drive of Max 20Amps to be used with this motor so that it will not damage the gearbox. Gearbox is as such robust but cannot sustain if the motor is stalled which is rare case only.

 

 

 



Downloads

Motor Datasheet

RMCS-2301 Datasheet



Mega Torque DC Planetary Geared Encoder Servo Motor 250W 750RPM 18VDC 39Kgcm
Rs. 7788 In Stock
The Mega Torque Planetary Encoder DC Geared Motor with Japanese Mabuchi motor RS-775WC as base motor of 750RPM is a unique system which enables you to get the sta
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

M3 x 50mm Brass Standoff with Hex Plastic Encloser Pack of 10pcs

M3 x 50mm Brass Standoff with Hex Plastic Encloser Pack of 10pcs

Rhino DC Servo Driver 50W Compatible with Modbus UART ASCII for encoder DC servo motor

Rhino DC Servo Driver 50W Compatible with Modbus UART ASCII for encoder DC servo motor

TLP281 4-Channel Optocoupler Isolation Module High/Low Level Arduino Compatible

TLP281 4-Channel Optocoupler Isolation Module High/Low Level Arduino Compatible

NEMA17 PLANETARY GEARED STEPPER MOTOR 60KGCM

NEMA17 PLANETARY GEARED STEPPER MOTOR 60KGCM


5V 10A 1 Channel Relay Module for Arduino

5V 10A 1 Channel Relay Module for Arduino

100mm Mecanum Wheel Set (1x Left, 1x Right)

100mm Mecanum Wheel Set (1x Left, 1x Right)

2.4G NRF24L01+PA+LNA Wireless Module With Antenna

2.4G NRF24L01+PA+LNA Wireless Module With Antenna

Portable Power Bank 5V 1500mah

Portable Power Bank 5V 1500mah




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!