Dual shaft DC motor with gear box which gives good torque and rpm at lower voltages. This motor can run at approximately 200rpm when driven by a Dual Li-Ion cell battery at 6 V and approximately at 300 rpm when driven by a 9V Li-Ion cell.
It is most suitable for light weight robot running on small voltage. Out of its two shafts one shaft can be connected to wheel, other can be connected to the position encoder.
- Working voltage : 3V to 9V
- 30gm weight
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- 1.9Kgf.cm torque
- No-load current = 60mA, Stall current = 700mA