Easy to Use, Versatile Robotics Kits...

Categories


Brushless DC Motor Driver 250W with Sensor Feedback


Rs.1,800

Free Economy Shipping
GST 18% extra
Availibility : In stock
Warranty : 1 Year warranty

Model : RMCS-3001
Add to Cart:


  • Description
  • Downloads & Media
  • Reviews

RMCS-3001 is Rhino Motion Controls introductory Brushless low voltage (15–48 V) DC drive designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.

The ENABLE, BRAKE and DIRECTION inputs are optically isolated. These inputs work with 2.5V to 5V logic drive signals. Motor will run on application of +ve input supply to ENABLE pins. To facilitate the direction change of Motor shaft, dedicated DIR pin is given. After applying the +ve input supply to DIR pin, power reset is required. BRAKE feature provided for braking the motor rotation.


General Specifications:

  • Input Supply Voltage: 15 to 48V
  • Rated current : 5A
  • Peak Current: 20A
  • Smooth and quiet operation at all speeds and extremely low motor heating
  • Fully configurable position and velocity loop
  • Delivers up to 5A of continuous current
  • 2.5V, 3.3V and 5V compatible BRAKE, DIRECTION and ENABLE inputs with 2-wire opto-isolated interface
  • Short-circuit protection for the motor outputs, over-voltage and under-voltage   protection
  • LED indication for power and error states
  • Ambient Temperature : 0-70°C

 

 

 


Driver Technical Specifications

Specification

Min

Max

Units

Comments

Supply Voltage

15

48

Volts DC

Between +Ve and GND

Phase Current

0.5

5

Amps

As demanded by load

Auto Current Reduction

50%

70%

Motor stand-still for more than 10ms

Power Dissipation

0

15

Watts

Short-Circuit Current

3

5

Amps

In case of motor terminal short

DIR Voltage

2.5

5

Volts DC

Ambient Temp.

0

70

Celsius

Humidity

0

95%

Non condensing


Driver Mechanical Specifications

Specification

Details

Dimensions (L * W * H)

100mm * 75mm *25mm

Weight

155gms

Heat Sink

Anodized Aluminum 3mm thickness

Mounting Screw Holes

3.6mm minimum diameter


Hall Effect Sensor Terminal

Terminal No.

Terminal Name

Wire Colour

Description

Terminal 1

Shield

-

Shield Cable

Terminal 2

HU

Yellow

Hall U

Terminal 3

HV

Green

Hall V

Terminal 4

HW

Blue

Hall W

Terminal 5

+5V

-

Power +Ve(+5V Output)

Terminal 6

GND

-

GND

 

Control Input Assignments

Terminal No.

Terminal Name

Description

Terminal 1

GND

COM

Terminal 2

ENA

Enable (Motor Free) +Ve input

Terminal 3

BRK

Brake(Motor Lock) +Ve input

Terminal 4

DIR

Direction (Motor Change Directions) +Ve input

 

Indication and Control

Resolution

Description

Pot-1

Potentiometer for speed  control

Pot-2

Current Setting

 *Note: RS-485 Communication will be updated soon.

 


 


Brushless DC Motor Driver 250W with Sensor Feedback
Rs. 1800 In stock
RMCS-3001 is Rhino Motion Controls introductory Brushless low voltage (15–48 V) DC drive designed for smooth and quiet operation without comprom
Be the first to write a review.  Write a Review.

Customers who bought this product also purchased...




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!