The M542 V2.0 is a high performance Leadshine original microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.
General Specifications:
- Leadshine original M542 V2.0 microstepping drive
- Input voltage Up to +50VDC
- Output current Up to 4.2A
- Pulse input frequency up to 300 KHz
- Suitable for 2-phase and 4-phase motors
- Automatic idle-current reduction
- Over-voltage, over-current protection
- Support PUL/DIR and CW/CCW modes
- Operating Temperature : 70 C
Power and Motor Terminal Assignments
Terminal No.
|
Terminal Name
|
Description
|
Terminal 1
|
GND
|
Power ground
|
Terminal 2
|
+Vdc
|
Power supply, 20~30 VDC, Including voltage fluctuation and EMF voltage.
|
Terminal 3
|
A+
|
Motor Phase A+
|
Terminal 4
|
A-
|
Motor Phase A-
|
Terminal 5
|
B+
|
Motor Phase B+
|
Terminal 6
|
B-
|
Motor Phase B-
|
Pulse and Direction Inputs
Terminal No.
|
Terminal Name
|
Description
|
Terminal 1
|
PUL+
|
Pulse +ve input
|
Terminal 2
|
PUL-
|
Pulse -ve input
|
Terminal 3
|
DIR+
|
Direction +ve input
|
Terminal 4
|
DIR-
|
Direction -ve input
|
Terminal 5
|
ENA+
|
Enable +ve input
|
Terminal 6
|
ENA-
|
Enable -ve input
|