Loading…

0 - ₹0.00


Combo of Pre-Programmed Stepper Motor Drive Controller + Rhino Micro-Stepping Drive 15-50V 5Amp + 19 Kgcm Stepper Motor + Power supply

0 out of 5 stars Write a Review.
    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • None
  • Model :
  • RMCS-4694
₹9,702 (Incl. GST)
₹8222 Excluding 18% GST
GST Input Tax Credit of ₹1480 Available. (Know More)


Add to Cart:



Got Better Price

  • Description
  • Downloads & Media
  • Reviews

This Stepper Motor Drive Controller is assembled and pre-programmed to be used with RMCS-1102 Rhino Micro-Stepping Drive 15-50V 5A. There are 5 switches to control steps of the stepper motor and 1 potentiometer to control speed of motor. This controller is ready to use you just need to connect with the drive. This product also includes one 9V 1A adapter to charge the battery of the controller. The minimum speed of the motor is 18 RPM and maximum speed of the motor is 300 RPM at 1000 Steps.


Functions of this Controller:

  • SW1: When switch 1 is pressed motor will run continously in clock-wise direction.

  • SW2: When switch 2 is pressed motor will run continously in anti clock-wise direction.

  • SW3: When switch 3 is pressed motor will move at 7.2 degree in clock-wise direction.

  • SW4: When switch 4 is pressed motor will move at 7.2 degree anti clock-wise direction.

  • SW5: Emergency Stop Switch.

  • Potentiometer: It can control Speed of the motor.

Micro-Stepping Drive Features

  • Smooth and quiet operation at all speeds and extremely low motor heating.

  • Industrial grade performance for 2-Phase Bipolar, 4-Phase and Uni-polar Stepper Motors.

  • Input supply voltage from 15VDC to 42VDC.

  • Selectable peak coil current from 0.5A to 5A.

  • Inaudible 20kHz current chopping frequency.

  • Selectable half-current during motor standstill to further reduce motor heating.

  • Selectable micro-steps up to 20000 steps per rotation for a 1.8deg stepper motor and adjustable for bulk orders.

  • Higher motor torque and higher speeds achievable due to advanced PID loop control algorithm.

  • 2.5V, 3.3V and 5V compatible PULSE and DIRECTION inputs with 2-wire opto-isolated interface.

  • Short-circuit protection for the motor outputs, over-voltage and under-voltage protection.

  • LED indication for power and error states.

  • For more information of drive Click here.

Nema23 19 kgcm Stepper Motor Features:

  • Step Angle : 1.8 Degree

  • Configuration: 4 wire stepper motor

  • Holding Torque: 19kgcm bipolar

  • Rated voltage : 3.2VDC

  • Phase current : 2.8Amp

  • Resistance/phase: 1.13E

  • Inductance/Phase : 5.6mH

  • Rotor inertia: 480 gcm2

  • Detent torque: 0.68kgcm

  • Length (L): 76mm

  • Shaft Dia : 6.35mm

  • Shaft Length : 22mm

  • Weight: 1030 grams

  • For more information of motor Click here.

Power supply Features:

  • Input Voltage range: 85 ~ 264VAC and 120 ~ 373VDC

  • Input Frequency Range: 47 ~ 63Hz

  • Output Voltage: 15V

  • Output Current Range: 0 ~ 5 A

  • Rated Power: 75W

  • Dimension:99*97*30 mm (L*W*H)

  • Protections: Short circuit/Over load

  • Operating Temperature: 70 C

Package Includes:

  • 1 x Pre-programmed Controller box

  • 1 x Charger

  • 1 x RMCS-1102 Stepper Motor Drive

  • 1 x 19 Kgcm Stepper Motor

  • 1 x 15V 5A 75W Power Supply

  • Model : RMCS-4694


Combo of Pre-Programmed Stepper Motor Drive Controller + Rhino Micro-Stepping Drive 15-50V 5Amp + 19 Kgcm Stepper Motor + Power supply
Rs. 9702 In Stock
This Stepper Motor Drive Controller is assembled and pre-programmed to be used with RMCS-1102 Rhino Micro-Stepping Drive 15-50V 5A. There are 5 switches to contro
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.



Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!