Loading…

0 - ₹0


Quadcopter Combo DIY kit

0 out of 5 stars Write a Review.
    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • None
  • Model :
  • RKI-2358
₹4,956 (Incl. GST)
₹4200 Excluding 18% GST
GST Input Tax Credit of ₹756 Available. (Know More)


Add to Cart:




  • Description
  • Downloads & Media
  • Reviews
This set is a complete combo of Frame, motors, propellers and ESCs required for a quadcopter.

R450 QUADCOPTOR FRAME WITH INTEGRATED PCB FOR EASY WIRING:

  • Built from quality glass fiber and polyamide nylon.
  • Integrated PCB connections for direct soldering of your ESCs
  • Pre-threaded brass sleeves for all of the frame bolts.
  • Colored arms for orientation to keep you flying in the right direction.
  • Large mounting tabs on main frame bottom plate for easy camera mounting.
  • Easy assembly.
  • Width: 450mm
  • Height: 55mm
  • Weight: 270g (w/out electronics)
  • Motor Mount Bolt Holes: 16/19mm

RC BRUSHLESS MOTOR 2212 1000KV WITH PROPELLER ADAPTOR:

  • Weight 52 gm
  • Runs on 2-3 Cell Li-Po battery
  • ESC Requirement minimum 25A
  • Length 43.5mm with shaft
  • Diameter 28.5mm
  • Shaft Diameter 3.17mm
  • 980 RPM/V no load speed
  • Free Load Current 2.5A
  • Maximum Efficiency : 86%
  • Thrust with 1047 Prop at 12V: 880gm
  • Included : Propeller Adaptor, Motor Mount, Mounting Screws

Propellers :

 

  • 2 Normal props (Puller) + 2 reverse props (Pusher) - total 4 props.
  • 10x4.5 inch ABS + Glass fiber plastic.
     

30A Brushless ESC:

  • High rate PWM
  • Low resistance
  • Sixteen cells Max (with BEC disabled)
  • User programmable brake
  • Low voltage auto setting based on battery
  • Throttle range self-adjusting
  • Soft start ramp up
  • Auto motor cutoff with reset
  • Runs motor in forward or reverse
  • Safe power arming program ensures motor will not run accidentally after turn on
  • Low torque start
  • Auto shut down when signal is lost
  • Constant Current: 30A
  • BEC 3A
  • Input Volt: 6V - 12V
  • Max Current: 40A
  • Low-Voltage Cutoff: Auto detect and set
  • Size: 56mm x 24mm x 8.5mm
  • Weight: 26g

Included Product Links:

R450 QUADROTOR FRAME WITH INTEGRAED PCB FOR EASY WIRING

RC BRUSHLESS MOTOR 2212 1000KV WITH PROPELLER ADAPTOR

COUNTER ROTATING PROPELLER 1045/1045R FOR QUADROTOR-MULTIROTOR

BRUSHLESS MOTOR SPEED CONTROLLER ESC 30A

 


Optional Add-ons:

KK2.1 MULTI-ROTOR LCD FLIGHT CONTROL BOARD - PREPROGRAMMED

ARDUCOPTER - APM 2.6 FULL KIT - GPS & POWER MODULE

 

  • Model : RKI-2358


Quadcopter Combo DIY kit
Rs. 4956 In Stock
This set is a complete combo of Frame, motors, propellers and ESCs required for a quadcopter. R450 QUADCOPTOR FRAME WITH INTEGRATED PCB FOR EASY WIRING:
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

Raspberry Pi HDMI 7Inch LCD Capacitive Touchscreen 10point Touch

Raspberry Pi HDMI 7Inch LCD Capacitive Touchscreen 10point Touch

Step down DC-DC adjustable voltage regulator 5A (XL4015E1 Based)

Step down DC-DC adjustable voltage regulator 5A (XL4015E1 Based)

Step up DC-DC adjustable voltage regulator 4A Output

Step up DC-DC adjustable voltage regulator 4A Output

Arduino Due R3 ARM Cortex-M3 Control board

Arduino Due R3 ARM Cortex-M3 Control board


4 Port USB 2.0 Hub for Raspberry Pi, PC, Laptop

4 Port USB 2.0 Hub for Raspberry Pi, PC, Laptop

3 Axis Linear Accelerometer Module 3g - Based on ADXL335

3 Axis Linear Accelerometer Module 3g - Based on ADXL335

Laser through Beam Switch 30Meters range

Laser through Beam Switch 30Meters range

Encoder Sensor with 5mm Slit

Encoder Sensor with 5mm Slit




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!