The RC832 receiver is nice and small in size for easy integration into your ground station, but large in quality and features. The receiver uses the same two-button interface as the TS832 transmitter, which makes the channel change the breeze. There are two independent AV outputs for both audio and video. That way, you can use a monitor and a set of glasses or perhaps a DVR to record your flight, because when your significant other asks you where you have been in the last 4 hours. Powering the receiver on the field is as easy as plugging a lipoly in 3 cells into an attached Pre-wired cable with mini JST.
32 channels, 4 frequency band wireless receiving.
Two buttons for channel and band exchange individually.
Two number display, timely locate the current receiving frequency and band
When power on, storage memory shows channel and frequency of the last time.
Two-way video and audio signal output ( video: PAL, NTSC,CECAM ; Audio: 6.5MHz)
5dB sensitivity gain more than normal receivers
Wide dynamic power supply ( 7-24v)
Receiving sensitivity: -95dBm
Receiving Frequency: ISM 5.8G 32CH
Power supply voltage: DC 7-26V
RF input matching: 50ohm SMA
Video output voltage: 1.0VP_P 75Ω
Audio output Voltage:1.0VP_P 10KΩ
Dimension:80 x 54 x15 (mm)