This is a
restricted part primarily used for drone manufacturing and repair. We require
proper end use documentation, identity proof of company/individual as well as
license to manufacture/operate drones or an indemnity bond for the same. Without
this documentation we can not service any order which includes this item.
proper documents are not received within 10 days, refund will be issued from our
side for this item. You can download the format for documents
share this information to any government agency if and when required.
The Naza-M V2 is a powerful flight controller for enthusiasts, as well as commercial and industrial flyers. It is easy to install, simple to configure, and extremely stable.
Naza-M V2 Specifications:
Quad-rotor I4, X4
Hex-rotor I6, X6, IY6, Y6
VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): 3A@5V(burst current:7.5A)
MC: 45.5mm x 32.5mm x 18.5mm
PMU: 39.5mm x 27.5mm x 10.0mm
GPS & Compass 46mm(diameter)x10mm
LED: 25mm x 25mm x 7.0mm
- Built-In Functions:Multiple Autopilot Control Mode,Enhanced Fail-safe,Low Voltage Protection,S-Bus Receiver Support,PPM Receiver Support,Independent PMU Module,2-axle Gimbal Support,iOSD mini supported.
Naza-M V2 Features
DJI NAZA V2 ALL-IN-ONE DESIGN
DJI adheres to continuously innovating and improving, with the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSION
The DJI Naza M PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products but also provides excellent maneuverability. It is more flexible and stable and gives the hobbyists a wonderful flight experience. New features have been included such GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.
DJI NAZA V2 – NINE TYPES OF MULTI-ROTORS SUPPORTED
DJI Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V;
( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please pay attention to the vibration situation and try to do some vibration dampening)
MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. A customer can switch among the three modes to adjust different flight environment. It also can adjust automatically in the flight environment and intelligent switch between GPS Atti. Mode and Atti. Mode to make sure the safety and security of flight. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
NAZA V2 GPS MODULE AVAILABLE/ACCURATE POSITION HOLD
The plug and play GPS module will greatly enhance the performance for entry AP with Position Hold, Return-To-Home, and Intelligent Orientation Control function. With GPS Module, the multi-rotors will have position and altitude locked even in windy conditions. Hovering accuracy is about 2.5m horizontal and 0.8m vertical
INTELLIGENT ORIENTATION CONTROL
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction.
Package Includes :