A small table top 3 Axis CNC Router kit which can cut, engrave or drill materials like Plastics, PCBs, Carbon Fibre and light metals like copper and brass. It can also engrave metals like MS, silver or Aluminum. Working area of the machine is 390x590x50mm(X,Y,Z). It comes with a 1.5KW AC spindle with ER11 collect and can go upto 24000rpm. This model comes with 22Kg.Cm Hybrid servo motors which gives high rapid speeds upto 2500rpm.

 

This is a Do It Yourself kit which includes fully assembled frame. All assembly and configuration has to be done by user which needs skills like soldering, drilling, cabling and mechanical assembly. Also working knowledge of stepper/servo motors and drives, cnc controller and CNC is required. Assembly may take 3 to 6 hours of work. Only a basic assembly instructions and configuration settings are provided by us. If you need a full working machine check our other packages for fully assembled machines.

 

Lightweight Aluminum design with 12mm ball screws give a high precision movements.The machine is fitted with our Hybrid Step-Servo Motors which provide closed loop control, high accelerations and speeds. All together it gives an accuracy of 0.05mm with repeatability of 0.02mm and speeds upto 4000mm/min. If used for drilling i.e. PCB drilling it can drill upto 120 holes per minute. Overall it gives a complete solution for desktop routing, engraving and milling for light materials.

 

The machine comes with 3 Axis Standalone CNC controller and plastic housing for CNC controller and motor drives. For convenience of shipping and packaging the machine is divided in to 3 boxes, assembly and connections take 10 minutes to make a full working machine.

Specifications:

• Machine Dimensions: 810×610×395mm
•  Construction material:6061 and 6063 hard aluminium alloy special extrusions
•  Engraving Area:590×390mm
•  Z-axis Stroke:65mm,Engraving depth depends on the length of the tool edge
•  Maximum job height: <=70mm
•  Rail type: Chromeplate shaft+Linear Bearings(Surface hardening 61HRC)
•  Transmission unit:SFU1204 ball screw
•  Repeat positioning Accuracy: 0.05mm
•  Machine weight: 16kg(including packaging)
•  Main application: Engraving & Cutting for Wood,bamboo,PCB,PVC,PMMA,plastics,ABS etc. It can also engrave on gold,silver,copper,aluminium,Pb etc. Its not for metal milling, it may damage ball screw or spindle.

 

This Package Includes:

• 1 X 3 Axis Standalone CNC Controller with spindle and MPG Support
• 3 X Hybrid Servo Motor 2-Phase 22kg-cm with Servo Drive
• 1 X 48V 5.2A Industrial Power Supply
• 1 x 24V 1.1A Industrial Power Supply
• 6 x Magnetic end stops Limit switch
• 1 X Cable Drag Chain Wire Carrier with end connectors 10x20mm 1Meter
• 1 X Cable Drag Chain Wire Carrier with end connectors 15x20mm 1Meter
• 3 X Nema23 Stepper and Hybrid Servo Motor Mount
• 1 X CNC Spindle 1.5Kw ER11 Air Cooled 80mm 220V 24000rpm

 

This machine is also available in different packages. Please check the comparison table below.