Loading…

0 - ₹0.00


Nema17 Stepper Motor 4.4Kgcm with Rhino 2A Microstepping Drive

0 out of 5 stars Write a Review.

Please Choose:

Power Supply




    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • 1 Year
  • Model :
  • RMCS-1160
₹2,454 (Incl. GST)
₹2080 Excluding 18% GST
GST Input Tax Credit of ₹374 Available. (Know More)


Add to Cart:



Got Better Price

  • Description
  • Downloads & Media
  • Reviews

NEMA17 4.4Kgcm Stepper Motor for high torque applications. Ideal Motor for ATM machines, 3D printers, Peristaltic pumps and job positioning and rotating applications. Standard NEMA 17 frame size. 4.4Kgcm bipolar configuration motor.

RMCS-1106 is Rhino Motion Controls low cost micro-stepping drive for 1.8deg Bipolar Stepper Motors. It is designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.

The RMCS-1106 achieves micro-stepping using a synchronous PWM output drive and high precision current feedback and this is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage.

The RMCS-1106’s closed-loop control gains are calibrated on start-up based on motor characteristics and also adjusted dynamically while the motor is in motion. This control algorithm makes it capable of achieving better torque at higher speeds in comparison to comparable drives in its range.

The PULSE/STEP, DIRECTION, ENABLE inputs are optically isolated. Both inputs work with 2.5V, 3.3V or 5V logic drive signals. The input drive current is 5mA at 2.5V so almost all logic family (74LS, 74HC, etc.) can be used to drive these inputs. Each input provides individual anode and cathode connections to the opto-isolator allowing for multiple input drive interfaces.


Features:

  • Step Angle: 1.8°
  • Number of Phase: 2
  • Rated Voltage: 2.8V
  • Rated Current: 1.68A
  • Resistance per phase: 1.65E
  • Inductance per phase: 2.8mH
  • Holding Torque: 4.4 kgcm
  • Weight:300 grams
  • Coil A: Black & Green
  • Coil B: Red & Blue
  • Length without shaft: 50mm
  • Shaft Length: 16mm
  • Width: 43mm

Micro-Stepping Drive Features

  • Smooth and quiet operation at all speeds and extremely low motor heating
  • Industrial grade performance for 2-Phase Bipolar, 4-Phase and Uni-polar Stepper Motors
  • Input supply voltage from 12VDc to 40VDC
  • Selectable peak coil current from 0.25A to 2A
  • Inaudible 20kHz current chopping frequency
  • Selectable half-current during motor standstill to further reduce motor heating
  • Selectable micro-steps up to 6400 steps per rotation for a 1.8deg stepper motor
  • Higher motor torque and higher speeds achievable due to advanced loop control algorithm
  • 2.5V, 3.3V and 5V compatible PULSE, ENABLE and DIRECTION inputs with 2-wire opto-isolated interface
  • Short-circuit protection for the motor outputs, over-voltage and under-voltage protection
  • LED indication for power and error states

Power and Motor Terminal Assignments

Terminal No.

Terminal Name

Description

Terminal 1

GND

Power Ground or Power –Ve

Terminal 2

+V

Power +Ve (12VDC to 40VDC Max wrt. GND)

Terminal 3

B-

Motor Coil Phase B-

Terminal 4

B+

Motor Coil Phase B+

Terminal 5

A-

Motor Coil Phase A-

Terminal 6

A+

Motor Coil Phase A+

 

Pulse and Direction Input Assignments

Terminal No.

Terminal Name

Description

Terminal 1

ENA-

Enable -Ve signal connected to cathode of opto-isolator

Terminal 2

ENA+

Enable +Ve signal connected to anode of opto-isolator

Terminal 3

DIR-

Direction -Ve signal connected to cathode of opto-isolator

Terminal 4

DIR+

Direction +Ve signal connected to anode of opto-isolator

Terminal 5

PUL-

Step or Pulse -Ve signal connected to cathode of opto-isolator

Terminal 6

PUL+

Step or Pulse +Ve signal connected to anode of opto-isolator

 

Switch Selection Table for Motor Coil Current Setting

Peak Current

SW1

SW2

SW3

0.0A

OFF

OFF

OFF

0.3A

OFF

OFF

ON

0.5A

OFF

ON

OFF

0.8A

OFF

ON

ON

1.0A

ON

OFF

OFF

1.3A

ON

OFF

ON

1.5A

ON

ON

OFF

1.8A

ON

ON

ON

 

Switch Selection Table for Step Resolution Setting

Steps/Rev

SW6

SW7

SW8

FULL

ON

ON

ON

HALF

ON

ON

OFF

1/4

ON

OFF

ON

1/8

ON

OFF

OFF

1/16

OFF

ON

ON

1/32

OFF

ON

OFF

1/32

OFF

OFF

ON

1/32

OFF

OFF

OFF

Switch in downward positions is ON

SW5 ON - Half-Current during Stand-still

SW5 OFF - Full-Current during Stand-still


 

 



Downloads

User Manual

Datasheet



Nema17 Stepper Motor 4.4Kgcm with Rhino 2A Microstepping Drive
Rs. 2454 In Stock
NEMA17 4.4Kgcm Stepper Motor for high torque applications. Ideal Motor for ATM machines, 3D printers, Peristaltic pumps and job positioning and rotating applicati
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

Proximity Switch Photoelectric Switch Sensor LJ12A34Z/BX

Proximity Switch Photoelectric Switch Sensor LJ12A34Z/BX

RFID Reader/Writer 13.56MHz RC522 (Arduino Compatible)

RFID Reader/Writer 13.56MHz RC522 (Arduino Compatible)

Laser Module 650nm 5V

Laser Module 650nm 5V

DC motor Single Shaft BO Motor series 300 rpm Good Quality

DC motor Single Shaft BO Motor series 300 rpm Good Quality


Metal Gear Standard Analog Servo Economy

Metal Gear Standard Analog Servo Economy

HC-SR04 Ultrasonic Sensor Distance Measuring Module

HC-SR04 Ultrasonic Sensor Distance Measuring Module

GPS Module NEO-6M uBLOX with Micro Usb Interface

GPS Module NEO-6M uBLOX with Micro Usb Interface

Ethernet shield W5100 for Arduino

Ethernet shield W5100 for Arduino




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!