Loading…

0 - ₹0


Planetary Geared Stepper Motor 60kgcm with RMCS-1102 Drive

0 out of 5 stars Write a Review.

Please Choose:

Power Supply




    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • 1 Year
  • Model :
  • RMCS-1171
₹6,077 (Incl. GST)
₹5150 Excluding 18% GST
GST Input Tax Credit of ₹927 Available. (Know More)


Add to Cart:




  • Description
  • Downloads & Media
  • Reviews

This combo includes Planetary Geared Stepper Motor 60kgcm along with MICRO-STEPPING STEPPER MOTOR DRIVE 15-50V 5Amp. This motor is available with 8mm back shaft. 

 

Planetary geared stepper motor 60kgcm comes with Integrated Planetary gearbox with a 1:19 gear ratio at rated torque of 60Kgcm at 30RPM.

 

RMCS-1102 is Rhino Motion Controls introductory micro-stepping drive for 1.8deg Bipolar Stepper Motors. It is designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.

The RMCS-1102 achieves micro-stepping using a synchronous PWM output drive and high precision current feedback and this is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage.

The RMCS-1102’s closed-loop control gains are calibrated on start-up based on motor characteristics and also adjusted dynamically while the motor is in motion. This control algorithm makes it capable of achieving better torque at higher speeds in comparison to comparable drives in its range.

The PULSE/STEP, DIRECTION inputs are optically isolated. Both inputs work with 2.5V, 3.3V or 5V logic drive signals. The input drive current is 5mA at 2.5V so almost all logic family (74LS, 74HC, etc.) can be used to drive these inputs. Each input provides individual anode and cathode connections to the opto-isolator allowing for multiple input drive interfaces.


Motor Specifications:

  • Step Angle : 1.8 Degree
  • Configuration: 4 wire stepper motor
  • Holding Torque: 60kgcm
  • Rated Voltage: 2.8VDC
  • Rated Speed: 300RPM
  • Rated Current: 1.68Amps
  • Motor length without Shaft: 84mm
  • Shaft Length: 20mm
  • Shaft Dia: 8mm
  • Back shaft Length: 12mm 
  • Back shaft Dia: 5mm
  • D-cut Length: 15mm 
  • Gear Ratio: 1:19
  • Efficiency: 0.71% 
  • Weight: 564 grams 

Micro-Stepping Drive Features

  • Smooth and quiet operation at all speeds and extremely low motor heating
  • Industrial grade performance for 2-Phase Bipolar, 4-Phase and Uni-polar Stepper Motors
  • Input supply voltage from 12VDc to 50VDC
  • Selectable peak coil current from 0.5A to 5.0A
  • Inaudible 20kHz current chopping frequency
  • Selectable half-current during motor standstill to further reduce motor heating
  • Selectable micro-steps up to 8000 steps per rotation for a 1.8deg stepper motor
  • Higher motor torque and higher speeds achievable due to advanced loop control algorithm
  • 2.5V, 3.3V and 5V compatible PULSE and DIRECTION inputs with 2-wire opto-isolated interface
  • Short-circuit protection for the motor outputs, over-voltage and under-voltage protection
  • LED indication for power and error states

Package Includes:

 

Power and Motor Terminal Assignments

Terminal No.

Terminal Name

Description

Terminal 1

GND

Power Ground or Power –Ve

Terminal 2

+V

Power +Ve (18VDC to 50VDC Max wrt. GND)

Terminal 3

B-

Motor Coil Phase B-

Terminal 4

B+

Motor Coil Phase B+

Terminal 5

A-

Motor Coil Phase A-

Terminal 6

A+

Motor Coil Phase A+

Pulse and Direction Input Assignments

Terminal No.

Terminal Name

Description

 

 

 

Terminal 1

ENA-

Enable (Motor Free)  -Ve optically isolated input

Terminal 2

ENA+

Enable (Motor Free) +Ve optically isolated input

Terminal 3

DIR-

Direction -Ve optically isolated input

Terminal 4

DIR+

Direction +Ve optically isolated input

Terminal 5

PUL-

Pulse -Ve optically isolated input

Terminal 6

PUL+

Pulse +Ve optically isolated input

Switch Selection Table for Motor Coil Current Setting

Peak Current

SW6

SW7

SW8

0.50A

OFF

OFF

OFF

1.00A

OFF

OFF

ON

1.40A

OFF

ON

OFF

2.00A

OFF

ON

ON

2.80A

ON

OFF

OFF

3.30A

ON

OFF

ON

4.20A

ON

ON

OFF

5.00A

ON

ON

ON

Switch Selection Table for Step Resolution Setting

Steps/Rev

SW1

SW2

SW3

SW4

200

ON

ON

ON

ON

400

OFF

ON

ON

ON

800

ON

OFF

ON

ON

1000

OFF

OFF

ON

ON

2000

ON

ON

OFF

ON

3200

OFF

ON

OFF

ON

4000

ON

OFF

OFF

ON

8000

OFF

OFF

OFF

ON

1600

ON

ON

ON

OFF

6400

OFF

ON

ON

OFF

10000

ON

OFF

ON

OFF

12000

OFF

OFF

ON

OFF

12500

ON

ON

OFF

OFF

12800

OFF

ON

OFF

OFF

16000

ON

OFF

OFF

OFF

20000

OFF

OFF

OFF

OFF

Switch in downward positions is ON 

SW5 ON - Half-Current during Stand-still

SW5 OFF - Full-Current during Stand-still


Downloads

Micro-Stepping Motor Drive 50V Installation Manual and Datasheet

 

 



Downloads

Datasheet

User Manual



Planetary Geared Stepper Motor 60kgcm with RMCS-1102 Drive
Rs. 6077 In Stock
This combo includes Planetary Geared Stepper Motor 60kgcm along with MICRO-STEPPING STEPPER MOTOR DRIVE 15-50V 5Amp. This motor is available with 8mm bac
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

PLANETARY GEARED STEPPER MOTOR 120KGCM

PLANETARY GEARED STEPPER MOTOR 120KGCM

Micro-Stepping Stepper Motor Drive 15-50V 5Amp

Micro-Stepping Stepper Motor Drive 15-50V 5Amp

Water Level Sensor Module

Water Level Sensor Module

5V Relay Module Expansion Board for Arduino

5V Relay Module Expansion Board for Arduino


A88 Metal Detector Module

A88 Metal Detector Module

XD-204 Data Logging Shield Module for Arduino

XD-204 Data Logging Shield Module for Arduino

DS18B20 Temperature Sensor Module

DS18B20 Temperature Sensor Module

Water Flow Sensor / Fluid Flowmeter YF-S201

Water Flow Sensor / Fluid Flowmeter YF-S201




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!