It is a high quality small spindle motor for the engraving machine works on 12-48VDC. Spindle motor can be used for curving metal or non-metallic materials. It includes cooling fan and the shank.

Specifications of Spindle:

• Working voltage: 12-48VDC (the slower the voltage at the end of the speed)

• Power: 300W

• Speed: 3000-12000r / min  

• Torque: 230mN.m

• Insulation resistance: greater than 2MΩ

• Insulation dielectric strength: 400V

• Diameter: 52mm

• Chuck part length: 48mm

• Chuck part diameter: 16mm

• Motor length : 175mm

• Spindle radial runout 0.02-0.05

• Can be used for carving metal or non-metallic materials

Features Of Speed Controller:

• Input voltage: DC 9-60V (Input voltage should be equal to the motor rated voltage) 

• Input current: requires more current than the motor

• Output voltage: linear under load

• Output current: 0-10A

• Output Power: Maximum 1200W

• Continuous current: within 8A     

• Working frequency: 25 KHZ

• Support motor: DC Motor 9-60V

• Speed range: 0% -100%

• Speed principle: adjusting flow

• Speed control knob: Potentiometer

• Size: 92mm*52mm*36mm                  

• Weight: 132 gm

Connection Instructions:

• Red: VCC

• Black: GND

• Blue: Motor+

• Yellow: Motor-