Loading…

0 - ₹0


Stepper Motor NEMA23 19KgCm Torque with LEADSHINE DM542 Drive

0 out of 5 stars Write a Review.
    Free Economy Shipping option available
  • Availability :
  • In Stock
  • Warranty :
  • 1 Month
  • Model :
  • RMCS-4406
₹5,581 (Incl. GST)
₹4730 Excluding 18% GST
GST Input Tax Credit of ₹851 Available. (Know More)


Add to Cart:




  • Description
  • Downloads & Media
  • Reviews

This combo of 19 KgCm Torque motor with Leadshine original Microstepping drive is ideal for small and medium sized CNC machines and robots. When used in CNC machines you can get rapid movement speeds up to 4200 mm/min.

RMCS-6602 is a DM542 leadshine original drive with fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542 an ideal choice for high requirement applications.

Motor Features

  • Step Angle : 1.8 Degree
  • Configuration: 4 or 6 wire stepper motor
  • Holding Torque: 19.1kgcm bipolar
  • Rated voltage : 3.2VDC
  • Phase current : 2.8Amp
  • Resistance/phase: 1.13E
  • Inductance/Phase : 5.6mH
  • Rotor inertia: 480 gcm2
  • Detent torque: 0.68kgcm
  • Length (L): 76mm
  • Weight: 1000 grams

General Specifications:

  • Leadshine original DM542 digital stepper drive
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Input voltage 18-50VDC
  • Output current programmable, from 1A to 4.2A
  • Pulse input frequency up to 200 KHz
  • Suitable for 2-phase and 4-phase motors
  • Automatic idle-current reduction
  • Over-voltage, over-current protection
  • TTL compatible and optically isolated input
  • Support PUL/DIR and CW/CCW modes  
  • Operating Temperature : 70 C

Power and Motor Terminal Assignments

Terminal No.

Terminal Name

Description

Terminal 1

+Vdc

Power supply, 20~30 VDC, Including voltage fluctuation and EMF voltage.

Terminal 2

GND

Power ground

Terminal 3

A+

Motor Phase A+

Terminal 4

A-

Motor Phase A-

Terminal 5

B+

Motor Phase B+

Terminal 6

B-

Motor Phase B-

 

 

Pulse and Direction Inputs

Terminal No.

Terminal Name

Description

Terminal 1

PUL+

Pulse +ve input

Terminal 2

PUL-

Pulse -ve input

Terminal 3

DIR+

Direction +ve input

Terminal 4

DIR-

Direction -ve input

Terminal 5

ENA+

Enable +ve input

Terminal 6

ENA-

Enable -ve input

 



Downloads

Manual

Motor Datasheet



Stepper Motor NEMA23 19KgCm Torque with LEADSHINE DM542 Drive
Rs. 5581 In Stock
This combo of 19 KgCm Torque motor with Leadshine original Microstepping drive is ideal for small and medium sized CNC machines and robots. When used in CNC
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

Boscam 5.8G 200mW Video Transmitter + Receiver fpv TS351+RC305

Boscam 5.8G 200mW Video Transmitter + Receiver fpv TS351+RC305

Raspberry Pi 3B+ based Media Center-Smart TV kit fully assembled

Raspberry Pi 3B+ based Media Center-Smart TV kit fully assembled

4x4 Universial 16 Key Keypad

4x4 Universial 16 Key Keypad

ESP32 Development Board WiFi+Bluetooth

ESP32 Development Board WiFi+Bluetooth


ATMega328 with Arduino Uno Bootloader

ATMega328 with Arduino Uno Bootloader

LCD Keypad Shield for Arduino Uno/Mega

LCD Keypad Shield for Arduino Uno/Mega

R307 Fingerprint Scanner Module

R307 Fingerprint Scanner Module

SIM 800A GSM GPRS Module with RS232 Interface

SIM 800A GSM GPRS Module with RS232 Interface




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!