Use this shield for wireless programming of your Arduino Uno/Mega without any trouble. It also works as a wireless trans-receiver master/slave mode. Default baudrate is 115200bps.
Note: Wireless programming will only work with IDE 1.5.5 or higher.
- Arduino Uno/Mega Compatible
- Selection switch for USB/Bluetooth communication.
- Works on UART lines
- Bluetooth Pre-programmed for wireless programming
- Plug and play module
- Default Baudrate: 115200bps, 8, N, 1
- Config Baudrate: 3800bps, 8, N, 1
- Passcode: "0000"
- 10Meter open Space range