Loading…

0 - ₹0.00



Modbus-Rtu 1 Channel / 1 Way Relay Module RS485 / TTL Communication Output

0 out of 5 stars Write a Review.
    Buy 3 or more pieces to get Free Shipping Option
  • Availability :
  • In Stock
  • Warranty :
  • None
  • Model :
  • RKI-4449
₹425 (Incl. GST)
₹360 Excluding 18% GST
GST Input Tax Credit of ₹65 Available. (Know More)


Add to Cart:



Got Better Price

  • Description
  • Downloads & Media
  • Reviews

One channel Modbus RTU relay module equipped with stable 8-bit MCU and RS485 level communication chip,adopt standard MODBUS RTU format RS485 communication protocol. It can realize 2-bit input signal detection and 2-bit relay output. It can be used for digital detection or power control occasions.


Features:

  • Support Modbus RTU protocol

  • Support RS485/TTL UART interface

  • Output indicator in multi mode

  • Address can be set

  • Support input reverse connection protection

  • Relay switch output

  • Support parameter memory function

Specifications:

  • Item name: Single Modbus Relay Module 

  • Work voltage:DC 7V~24V

  • Baud rate:4800/9600/19600bps(default 9600bps)

  • Optocoupler input signal:DC 3.3V~30V

  • Set address:1~255

  • Relay contorl mode: ON/OFF,Delay_ON,Delay_OFF mode

  • Delay time: 0~6553.5s 

  • Load: AC 250V 10A or DC 28V 10A

  • Protocol:Modbus RTU

  • Interface:RS485/TTL UART

  • Control channel: 1 channel

  • Operating Temperature:-20℃~85℃

  • Operating Humidity:5%~95%RH

  • Module Size:85*49*19mm

Modbus RTU Command:

  1.  Suppose the device address is 0xFF so return 00 10 00 00 00 01 02 00 FF EB 80 and the 9th btye is device address.
  2.  Turn ON CH_1 Relay(Normal Mode):
    • Send:   FF 05 00 00 FF 00 99 E4
    • Return: FF 05 00 00 FF 00 99 E4
    • The 3rd and 4th byte are relay addresses.So it can be 0x0000,0x0001,0x0002,0x0003.
    • The 5th and 6th byte are relay data.0xFF00 means turn ON relay and 0x0000 means turn OFF relay.
  3.  Turn OFF CH_1 Relay(Normal Mode):
    • Send:   FF 05 00 00 00 00 D8 14
    • Return: FF 05 00 00 00 00 D8 14
  4. Turn ON All relays:
    • Send:   FF 0F 00 00 00 08 01 FF 30 1D
    • Return: FF 0F 00 00 00 08 41 D3
  5. Turn OFF All relays:
    • Send:   FF 0F 00 00 00 08 01 00 70 5D
    • Return: FF 0F 00 00 00 08 41 D3
  6. Set device address to 0x01:
    • Send:   00 10 00 00 00 01 02 00 01 6A 00
    • Return: 00 10 00 00 00 01 02 00 01 6A 00
    •  Note: The 9th btye is device address.
  7. Set device address to 0xFF:
    • Send:   00 10 00 00 00 01 02 00 FF EB 80
    • Return: 00 10 00 00 00 01 02 00 FF EB 80
  8. Read device address:
    • Send:   00 03 00 00 00 01 85 DB
    • Return: 00 03 02 00 FF C5 C4
    • Note: The 5th btye is device address.
  9. Read relay status:
    • Send:   FF 01 00 00 00 08 28 12
    • Return: FF 01 01 01 A1 A0
    • Note:The 4th means which one relay.0 means OFF and 1 means ON.
  10. Read optocoupler input staturs:
    • Send:   FF 02 00 00 00 08 6C 12
    • Return: FF 02 01 01 51 A0
    • Note:The 4th means which one input.0 means low level signal input and 1 means high level signal input.
  11. Set baud rate 4800bps:
    • Send:   FF 10 03 E9 00 01 02 00 02 4A 0C
    • Return: FF 10 03 E9 00 01 C5 A7
    • Note:The 9th btye is baud rate value.0x02 is 4800bps.0x03 is 9600bps.0x04 is 19200bps.
  12. Set baud rate 9600bps:
    • Send:   FF 10 03 E9 00 01 02 00 03 8B CC
    • Return: FF 10 03 E9 00 01 C5 A7
  13. Set baud rate 19200bps:
    • Send:   FF 10 03 E9 00 01 02 00 04 CA 0E
    • Return: FF 10 03 E9 00 01 C5 A7
  14. Turn ON CH_1 Relay(2S Flashing Mode):
    • Send:   FF 10 00 03 00 02 04 00 04 00 14 C5 9F
    • Return: FF 10 00 03 00 02 A4 16
    • Note1:The 3rd and 4th byte are relay addresses.So CH1~CH4 can be 0x0003,0x0008,0x000D,0x0012.
    • Note2:The 10th and 11th byte are delay time in second.The minimum delay time is 0.1s.Relay will OFF after delay time.So the delay time in this command is : 0x0014*0.1=2S.
  15. Turn OFF CH_1 Relay(3S Flashing Mode):
    • Send:   FF 10 00 03 00 02 04 00 02 00 1E A5 99
    • Return: FF 10 00 03 00 02 A4 16
    • Note:Relay will ON after delay time.So the delay time in this command is : 0x001E*0.1=3S.


Downloads

Arduino Library



Modbus-Rtu 1 Channel / 1 Way Relay Module RS485 / TTL Communication Output
Rs. 425 In Stock
One channel Modbus RTU relay module equipped with stable 8-bit MCU and RS485 level communication chip,adopt standard MODBUS RTU format RS485 communication protoco
Be the first to write a review.  Write a Review.
Disclaimer : Actual product may vary from the product photograph displayed above. Photograph just for reference.

Customers who bought this product also purchased...

DS1302 Real Time Clock Module RTC

DS1302 Real Time Clock Module RTC

I2C Logic Level Converter 4 channel Bi-Directional Module

I2C Logic Level Converter 4 channel Bi-Directional Module

SMPS Supply 12V 1A

SMPS Supply 12V 1A

LoRa 868MHz SX1276 RF Transreceiver Module RFM95W Compatible

LoRa 868MHz SX1276 RF Transreceiver Module RFM95W Compatible


ESP8266 WiFi Serial module ESP-01 for IOT Applications

ESP8266 WiFi Serial module ESP-01 for IOT Applications

Industrial Grade Temperature & Humidity Transmitter SHT20 Sensor High Precision Monitoring Modbus RS485

Industrial Grade Temperature & Humidity Transmitter SHT20 Sensor High Precision Monitoring Modbus RS485




Content
GST Compliant Invoice

Provide us your GSTIN number while checking out and get GST Input Tax Credit!