NEMA23 Stepper Motor 19KgCm torque with 4.5A Mircostepping Drive

	Nema23 18kgcm stepper motor with Industrial Grade High Performance Micro-Stepping Stepper motor drive. Offers quiet and smooth operation. Best suitable for machines, such as X-Y tables, labeling machines, laser cutters, engraving machines, pick-place devices and various CNC machines.
	Availibility: In Stock Warranty: 3 Months Model: RMCS-1151 Downloads: User Manual
Price: Rs.5,500 Only* Quantity:

This combo of 19 KgCm Torque motor with Microstepping drive is ideal for small and medium sized CNC machines and robots. When used in CNC machines you can get rapid movement speeds up to 4200 mm/min.

RMCS-1101 is Rhino Motion Controls introductory micro-stepping drive for 1.8deg Bipolar Stepper Motors. It is designed for smooth and quiet operation without compromising on torque and control at higher speeds. It has short-circuit protection for the motor outputs, over-voltage and under-voltage protection and will survive accidental motor disconnects while powered-up.

The RMCS-1101 achieves micro-stepping using a synchronous PWM output drive and high precision current feedback and this is absolutely silent when the motor is stopped or turning slowly. It virtually eliminates stopped-motor heating regardless of power supply voltage.

The RMCS-1101’s closed-loop control gains are calibrated on start-up based on motor characteristics and also adjusted dynamically while the motor is in motion. This control algorithm makes it capable of achieving better torque at higher speeds in comparison to comparable drives in its range.

The PULSE/STEP, DIRECTION inputs are optically isolated. Both inputs work with 2.5V, 3.3V or 5V logic drive signals. The input drive current is 5mA at 2.5V so almost all logic family (74LS, 74HC, etc.) can be used to drive these inputs. Each input provides individual anode and cathode connections to the opto-isolator allowing for multiple input drive interfaces.

Motor Features

• Step Angle : 1.8 Degree
• Configuration: 6 wire stepper motor
• Holding Torque: 19.1kgcm bipolar
• Rated voltage : 3.2VDC
• Phase current : 2.8Amp
• Resistance/phase: 1.13E
• Inductance/Phase : 5.6mH
• Rotor inertia: 480 gcm²
• Detent torque: 0.68kgcm
• Length (L): 76mm
• Weight: 1000 grams

Micro-Stepping Drive Features

• Smooth and quiet operation at all speeds and extremely low motor heating
• Industrial grade performance for 2-Phase Bipolar, 4-Phase and Uni-polar Stepper Motors
• Input supply voltage from 18VDc to 50VDC
• Selectable peak coil current from 1A to 4.5A
• Inaudible 40kHz current chopping frequency
• Selectable half-current during motor standstill to further reduce motor heating
• Selectable micro-steps up to 12800 steps per rotation for a 1.8deg stepper motor
• Higher motor torque and higher speeds achievable due to advanced loop control algorithm
• 2.5V, 3.3V and 5V compatible PULSE and DIRECTION inputs with 2-wire opto-isolated interface
• Short-circuit protection for the motor outputs, over-voltage and under-voltage protection
• LED indication for power and error states

Power and Motor Terminal Assignments

Pulse and Direction Input Assignments

Switch Selection Table for Motor Coil Current Setting

Switch Selection Table for Step Resolution Setting

Switch in downward positions is ON 

SW5 ON - Half-Current during Stand-still

SW5 OFF - Full-Current during Stand-still

Downloads

* - Price excluding sales tax and shipping
• Model: RMCS-1151

Product 2/3

Customers who bought this product also purchased...

Mega Torque Quarter Scale Servo

High Torque Encoder DC Servo Motor 900RPM w/ UART/I2C/PPM Drive

Mitsumi DC Motor with Encoder & PID DC Servo Driver

High Precision Quad Encoder DC Motor

AVR 40 Pin Rapid Robot controller board V2

Qu-Bot, Absolute Beginner's Programmable Robot Kit