Video has been taken with this Quadcopter + Tarot T-2D gimbal + DYS HDV-1 Camera
This QuadRotor kit is complete Ready to Fly quadcopter combo. It includes everything to fly your own drone out of the box. To start flying just unbox, power on transmitter, and connect battery to aircraft, arm and start flying. The flight controller is Full featured Arduino based advanced controller which is also open source. GPS tracking and various parameters logging is supported through on board data flash memory. A powerful ground station software is available for basic to very advance parameters configurations. The flight controller also offers various modes like Stabilize (stable hovering), Altitude Hold (Auto level with barometer), GPS position hold (outdoors only), RTL (Automatic return to starting position), Auto Land and more. The aircraft is completely built, tested and tuned for quality flying.
This quadrotor is designed for them who are looking to buy low cost, assembled, full featured and upgradabale flying platform for hobby, research and aerial photography. It can carry 2/3 axis gimbal with gopro/gopro factor camera.
- Tried and tested combination of frame, motors, esc, propellers, flight controller, radio, battery etc.
- Custom CNC cut 'V' Frame where the front arm are at an angle of 20° instead of standard 45°. This gives open field of view for camera so props don't come in video. Also the flickering in video due to prop shadow is very less.
- Gyro + Accelerometer + Magnetometer IMU for full control, Onboard dataflash for logging, GPS included, Google maps waypoint navigation, Auto landing,
- Includes long range 6 channel 2.4 GHz radio, battery and charger
- Flight time upto 14.5 minutes - without any payload standardard hovering in low wind conditions/indoor
- Various modes for manual, autonomous and semi-autonomous control
- Fully assembled and tuned - requires about 4-6 hours to assemble , configure and tune from kit
This Product Includes:
- Completely assembled quadcopter 'V' frame
- Properly positioned and damped APM 2.6 flight controller inside the frame
- Connected Motors and ESCs
- Propellers - marked to be mounted in correct direction
- 3700 mAh Battery, mounted on top
- Connected and configured Flight controller accessories like Battery Monitor, External GPS and Compass
- 6 Channel Fully Programmable radio - fully configured for multirotors with modes switching
- 4 extra Propellers
- Battery Charger with AC adaptor
- Basic tools, Hex keys and screwdrivers to tweak custom mods
Included Product Links:
ECONOMY QUADCOPTER V FRAME
ARDUPILOT MEGA 2.6 FLIGHT CONTROLLER ARDUINO COMPATIBLE
30A BRUSHLESS ESC WITH SIMONK FIRMWARE FOR MULTIROTORS
LITHIUM POLYMER ( LI-PO) RECHARGEABLE BATTERY 11.1V 3700MAH 25C
MULTIROTOR MOTOR 980KV WITH 1045 PROPELLER PAIR
APM UBLOX NEO6M GPS WITH COMPASS
Flysky FS-i6 6CH 2.4GHz Transmitter and Receiver
LI-ION/LI-PO INTELLIGENT BALANCE CHARGER FOR 2-3 CELL BATTERY