Easy to Use, Versatile Robotics Kits...

Categories


DC Servo motor 24V 100W with 2000 PPR encoder


Starting at: Rs.2,800

Please Choose:

Motor Driver




Power Supply for Stepper Motor




Availibility : In stock
Warranty : 1 Month

Model : RMCS-2002
Add to Cart:


  • Description
  • Downloads & Media
  • Reviews

This Permanent Magnet DC Motor with encoder is suitable for small and medium CNC machines and for replacement of stepper motors to DC servos which gives high speed and accuracy. This motor with drive can replace a stepper motor upto NEMA 34 size where high speeds are required. Encoder is 500 Line optical encoder which gives 2000 PPR. Motor runs on 12 to 24VDC and gives 6000 RPM on 24V. This motor may be directly coupled with ball screw linear system with a coupler. Reduction is possible with external timing belt and pulley system.

The Motor is a Industrial grade motor with replacable carbon brushes, hardened shaft and skewed armature for reduction of cogging effect.


Features

  • 6000RPM @ 24V DC
  • Hardened slotted shaft 8 mm diameter, 20 mm length
  • Slot on shaft for easy coupling
  • Mounting PCB of 40mm x 4 holes
  • Motor Diameter 60 mm
  • Length 127.5 mm without shaft
  • 1100gm weight with cables
  • 5kgcm torque@ 2000 RPM
  • Replaceable Carbon Brushes
  • Can also be used as normal DC motor without encoder
  • No-load current = 600 mA, Stall current = upto 30A(Max)

The 0.18 degree resolution optical encoder with quadrature outputs for increment and decrement counting. It will give 2000 transitions per rotation between outputs A and B. A quadrature decoder is required to convert the pulses to an up or down count. The Encoder is build to Industrial grade.


Incremental Encoder Power and Input Terminal Assignments

Terminal No.

Terminal Name

Wire Color

Description

Terminal 1

GND

BLACK

Ground should be connected to negative of supply

Terminal 2

VCC

RED

VCC should be connected to +ve 5V of supply

Terminal 3

Enc A

GREEN

Quadrature encoded output A

Terminal 4

Enc B

YELLOW

Quadrature encoded output B

 


DC Servo motor 24V 100W with 2000 PPR encoder
Rs. 2800 In stock
This Permanent Magnet DC Motor with encoder is suitable for small and medium CNC machines and for replacement of stepper motors to DC servos which gives high spee

 

11/09/2016
Debraj Deb
5 of 5 Stars
Service from Robokits is very good. I got the motor shipped to Bangalore within 1 day (to Bangalore). Motor build quality is good and the encoder is as per specification. But the motor draws 1.15Amps at no load (not 600mA, as mentioned). The reason is that, the motor has lower back emf. In otherwords, the permanent magnet is not that strong on the motor and hence to produce some "x" power, it will consume more current and a similar motor, which has stronger permanent magnet. Hence the rating is "4". Also a slight loading of the motor will cause the current to increase drastically. But good part is that, this motor has higher speed (because of lower flux of permanent magnet). Overall, I am satisfied.
10/11/2015
PARTH SONI
5 of 5 Stars
Do you have pc keyboard decoder - serial out for directly interface with microcontroller serial without pc means I want to interface microcontroller with 16x2 LCD and ps2 pc keyboard directly.

 



Content
Servo Brackets Availabe

Build any type of Robot from Servo Erector brackets set from Robokits.

 

Click Link Below.

http://robokits.co.in/robot-parts/servo-brackets

 

Ships Same working day.