AVR 40 Pin Rapid Robot controller board with L298 motor drivers with 2A per channel capacity. Maximum 4 DC Motors or 2 Stepper Motors can be controlled with this module. Sample programs in GCC will be available.
This Product Includes
- CD containing all required software's and sample codes in WINAVR
- AVR Rapid Robot Controller Board V2
*Note: Microcontroller, Motor driver Ic's, Programmer etc. is optional and not included in base price. Select this items from drop down menu below product image.
Robot Controller Board Features
- On Board Regulator with filters and Operating voltage from 6V - 20 V
- 4 LED's selectable though individual jumpers
- 5 Switches including reset
- 3 Switches on interrupt pins
- Power on/off toggle switch
- Motor on/off toggle switch
- 16MHz crystal for maximum speed
- AREF setting potentiometer
- Onboard LCD connector compatible to HD44780 LCD Modules
- LCD brightness control
- Frosted Blue Power Indicator
- 4 DC/2 Stepper motor driving capability
- PWM pins connected to motor drivers for speed control of motors
- Full Speed/PWM Speed control selection jumpers
- 4 ADC/Standard servo compatible connectors
- All Pins accessible through male header pins
- Serial Programmer and PC-MCU serial link optional
- 2A per channel output capacity
- All required connectors included.
- LCD Module HD44780 compatible
- AVR Microcontroller (Selectable between ATMega16L, ATmega16 and ATMega32)
- PC-MCU link selectable (Selectable between Serial and USB Port)
- AVR programmer (Selectable between Serial Port, Parallel Port and USB Port Programmer)
*Serial port programmer does not work properly when LCD is connected. We recommend Parallel or USB port programmer if you are using LCD.
- Links to the optional Items