Easy to Use, Versatile Robotics Kits...




Availibility : In Stock
Warranty : None

Model : RKI-1101
Add to Cart:

  • Description
  • Downloads & Media
  • Reviews

Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology from Microchip.


  • Power Managed Modes:
    • Run: CPU on, peripherals on
    • Idle: CPU off, peripherals on
    • Sleep: CPU off, peripherals off
    • Idle mode currents down to 5.8 μA typical
    • Sleep mode current down to 0.1 μA typical
    • Timer1 Oscillator: 1.8 μA, 32 kHz, 2V
    • Watchdog Timer: 2.1 μA
    • Two-Speed Oscillator Start-up
  • Peripheral Highlights:
    • High-current sink/source 25 mA/25 mA
    • Three programmable external interrupts
    • Four input change interrupts
    • Up to 2 Capture/Compare/PWM (CCP) modules, one with Auto-Shutdown (28-pin devices)
    • Enhanced Capture/Compare/PWM (ECCP) module:
      - One, two or four PWM outputs
      - Selectable polarity
      - Programmable dead time
      - Auto-Shutdown and Auto-Restart
    • Master Synchronous Serial Port (MSSP) module supporting 3-wire SPI™ (all 4 modes) and I2C™ Master and Slave Modes
    • Enhanced Addressable USART module:
      - Supports RS-485, RS-232 and LIN 1.2
      - RS-232 operation using internal oscillator block (no external crystal required)
      - Auto-Wake-up on Start bit
      - Auto-Baud Detect
    • 10-bit, up to 13-channel Analog-to-Digital Converter module (A/D):
      - Auto-acquisition capability
      - Conversion available during Sleep
    • Dual analog comparators with input multiplexing)
  • Flexible Oscillator Structure:
    • Four Crystal modes, up to 40 MHz
    • 4X Phase Lock Loop (available for crystal and internal oscillators)
    • Two External RC modes, up to 4 MHz
    • Two External Clock modes, up to 40 MHz
    • Internal oscillator block:
      - 8 user selectable frequencies, from 31 kHz to 8 MHz
      - Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
      - User tunable to compensate for frequency drift
    • Secondary oscillator using Timer1 @ 32 kHz
    • Fail-Safe Clock Monitor:
      - Allows for safe shutdown if peripheral clock stops
  • Special Microcontroller Features:
    • C compiler optimized architecture:
      - Optional extended instruction set designed to optimize re-entrant code
    • 100,000 erase/write cycle Enhanced Flash program memory typical
    • 1,000,000 erase/write cycle Data EEPROM memory typical
    • Flash/Data EEPROM Retention: 100 years typical
    • Self-programmable under software control
    • Priority levels for interrupts
    • 8 x 8 Single-Cycle Hardware Multiplier
    • Extended Watchdog Timer (WDT):
      - Programmable period from 4 ms to 131s
    • Single-supply 5V In-Circuit Serial Programming™ (ICSP™) via two pins
    • In-Circuit Debug (ICD) via two pins
    • Wide operating voltage range: 2.0V to 5.5V
    • Programmable 16-level High/Low-Voltage Detection (HLVD) module:
      - Supports interrupt on High/Low-Voltage Detection
    • Programmable Brown-out Reset (BOR)
      - With software enable option


PIC18F4520 Datasheet

Rs. 300 In Stock
Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology from Microchip. Features Power Managed Modes: Run: CPU on, periph
Be the first to write a review.  Write a Review.

Servo Brackets Availabe

Build any type of Robot from Servo Erector brackets set from Robokits.


Click Link Below.



Ships Same working day.