Easy to Use, Versatile Robotics Kits...

Categories


NEMA34 Stepper Motor 85Kgcm Torque with LEADSHINE MA860H Drive


Rs.12,950

GST 18% extra
Availibility : In Stock
Warranty : 1 Month

Model : RMCS-4404
Add to Cart:


  • Description
  • Downloads & Media
  • Reviews

Ideal Motor for CNC machines and other machinery. Standard NEMA 34 frame size. 85Kgcm bipolar configuration motor with LEADSHINE MA860H STEPPER DRIVER 7.2A. Ideal performance at 5Amp configuration.

The MA860H is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features

  • Step Angle : 1.8 Degree
  • Configuration: 4 wire bipolar stepper motor
  • Holding Torque: 85kgcm bipolar mode
  • Phase current : 5Amp
  • Resistance/phase: 0.76ohm
  • Inductance/Phase : 8.5mH
  • Rotor inertia: 2700 gcm2
  • Length (L): 118mm
  • Shaft Dia : 12.70mm
  • Shaft Length : 32mm
  • Weight: 3800 grams

Leadshine Drive Specifications:

  • Input voltage Up to +80VAC or +110VDC
  • Output current Up to 7.2A
  • Pulse input frequency up to 300 KHz
  • Suitable for 2-phase and 4-phase motors
  • Automatic idle-current reduction
  • Over-voltage, over-current protection
  • Support PUL/DIR and CW/CCW modes  
  • Operating Temperature : 70 C

Power and Motor Terminal Assignments

Terminal No.

Terminal Name

Description

Terminal 1

AC

Power supply, 18~80 VAC or 24~110 VDC, Including voltage fluctuation

Terminal 2

AC

and EMF voltage. Recommended 18~60VAC or 24~85VDC

Terminal 3

A+

Motor Phase A+

Terminal 4

A-

Motor Phase A-

Terminal 5

B+

Motor Phase B+

Terminal 6

B-

Motor Phase B-

 

 

Pulse and Direction Inputs

Terminal No.

Terminal Name

Description

Terminal 1

PUL+

Pulse +ve input

Terminal 2

PUL-

Pulse -ve input

Terminal 3

DIR+

Direction +ve input

Terminal 4

DIR-

Direction -ve input

Terminal 5

ENA+

Enable +ve input

Terminal 6

ENA-

Enable -ve input

 


NEMA34 Stepper Motor 85Kgcm Torque with LEADSHINE MA860H Drive
Rs. 12950 In Stock
Ideal Motor for CNC machines and other machinery. Standard NEMA 34 frame size. 85Kgcm bipolar configuration motor with LEADSHINE MA860H STEPPER DRIVER 7.2A. Ideal
Be the first to write a review.  Write a Review.



Content
Servo Brackets Availabe

Build any type of Robot from Servo Erector brackets set from Robokits.

 

Click Link Below.

http://robokits.co.in/robot-parts/servo-brackets

 

Ships Same working day.